Sleeving Braid | More Detail
The primary use of wire sleeving braid is to provide sensitive cables with an EMC screen to shield them against electromagnetic, electrostatic and radio frequency interference. Tin plated copper is the default plating, please refer to the PDF catalog for further information and options.

Create Part

Download PDF

Stocking Braid | More Detail
Designed specifically to maintain earth continuity on medium and high voltage jointing systems. The braid is fastened to one end of the exposed armouring. The braids’ construction allows it to be pushed back to open and form a cylinder of sufficient diameter to enable the stocking braid to slide over the joint section.

Create Part

Download PDF

Wire Mesh Tape | More Detail
Electro tin plated copper mesh tape has a number of applications but is used mainly for EMC / RFI screening of electrical power, control, data and communication cables and for earth continuity in cable joints. In addition, the springy nature of the tape lends itself to providing a mechanical cushion against adjacent surfaces.

MIL-DTL-38999 Series I | More Detail
MIL-DTL-38999 Series I is a bayonet coupling subminiature configuration with high contact density, ideal for smaller wire gauge, general-purpose applications. These environmentresisting connectors are 100% “scoop-proof.” Pins are recessed in elongated shells to prevent the possibility of bending contacts when plugs are scooped into the mating receptacles.

Create Part

MIL-DTL-38999 Series II | More Detail
MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact retention system.

Create Part

MIL-DTL-38999 Series III | More Detail
MIL-DTL-38999 Series III is the newest cylindrical connector designed for highest performance capabilities used in both general purpose and severe environment applications.

Create Part

D38999/9 Dummy Receptacles | More Detail
Dummy Receptacle for MIL-DTL-38999 Series I

Create Part

MS27501 & MS27502 Protective Caps | More Detail
Protective Caps for MIL-DTL-38999 Series I

Create Part

M85049/17 EMI/RFI Environmental Backshell | More Detail
EMI/RFI Environmental straight backshells for MIL-DTL-38999 Series I & II

Create Part

M38999/10 (D38999/10) Dummy Receptacles | More Detail
Dummy Receptacle for MIL-DTL-38999 Series II (Supersedes MIL-C-38999 Series II)

Create Part

M85049/27 "E" Nuts | More Detail
M85049/27 "E" Nuts for MIL-DTL-38999 Series I & II

Create Part

M85049/29 Non-Enviro Strain Relief Backshell | More Detail
M85049/29 Non-Environmental Strain Relief Backshells

Create Part

M85049/36 EMI/RFI Non-Environmental Backshell | More Detail
M85049/36 EMI/RFI Non-Environmental backshells for MIL-DTL-38999 Series I & II

Create Part

M85049/37 EMI/RFI Non-Environmental Backshell | More Detail
M85049/37 EMI/RFI Non-Environmental Backshell for MIL-DTL-38999 Series I & II

M85049/47 Strain Reliefs | More Detail
M85049/47 Strain Reliefs for MIL-DTL-38999 Series I & II

Create Part

M85049/49-2 Strain Reliefs | More Detail
M85049/49-2 Strain Reliefs for MIL-DTL-38999 Series I & II

Create Part

M85049/62 Shrink Boot Adapters | More Detail
M85049/62 Shrink Boot Adapters for MIL-DTL-38999 Series I & II

Create Part

M85049/56 Qwik-Ty® Strain Reliefs | More Detail
M85049/56 Qwik-Ty® Strain Reliefs for MIL-DTL-38999 Series I & II

Create Part

M85049/57 Qwik-Ty® Strain Reliefs | More Detail
M85049/57 Qwik-Ty® Strain Reliefs for MIL-DTL-38999 Series I & II

Create Part

M85049/63 Qwik-Ty® Strain Reliefs | More Detail
M85049/63 Qwik-Ty® Strain Reliefs for MIL-DTL-38999 Series I & II

Create Part

MIL-T-81714 Series I Module | More Detail
Track-mounted terminal junction modules in five standard sizes AWG12 through AWG26 with a broad selection of bussing variations.

MIL-T-81714 Series I Electronic Junction Module | More Detail
MIL-T-81714 Series I Electronic Junction Modules meet all dimensional and performance requirements of M81714/26 and are specifically developed for electronic component packaging.

MIL-T-81714 Series I Electronic Junction Grounding | More Detail
Environmentally sealed, multi-contact grounding/bus connection modules are available in sizes AWG22 to AWG12, and are provided with an integral threaded grounding stud. The stud is electrically and mechanically common to all internal contacts of the module.

MIL-T-81714 Series I Electronic Junction Module S | More Detail
Environmentally sealed single wire and dual wire in-line splices to MIL-T-81714 Series I provide a quick, efficient connection qualified to M81714/11 & M81714/12 requirements facilitate system expansion and repair.

Terminal Junction Module Mounting Tracks & Rails | More Detail
M81714 Series I feedback and feedthru mounting tracks are offered as standard and a lightweight feedback version with weight reduction cut-outs per M81714/16 offers weight reduction for weight critical applications.

MIL-T-81714 Series II Modules | More Detail
High density, low weight, environmentally sealed junction module and light weight composite mounting track system.

MIL-T-81714 Series II Electronic Junction Module | More Detail
MIL-T-81714 Series II Electronic Junction Modules meet all dimensional and performance requirements of M81714/62 and are specifically developed for electronic component packaging.

MIL-T-81714 Series II Electronic Junction Groundin | More Detail
Environmentally sealed, multi-contact grounding/bus connection modules are available in sizes AWG22 to AWG16, and are provided with an integral threaded grounding stud. The stud is electrically and mechanically common to all internal contacts of the module. It is also available as flange mount.

M81714/61 Series II Distribution Socket Junction | More Detail
M81714/61 Series II Distribution Socket Junction Modules available in a variety of configurations feature the same construction and features as the standard Series II high density modules and are recommended for power distribution applications.

MIL-T-81714 Series II Socket Junction Module Splic | More Detail
Environmentally sealed single wire and dual wire in-line splices to MIL-T-81714 Series I provide a quick, efficient connection qualified to M81714/11 & M81714/12 requirements facilitate system expansion and repair.

Socket Junction Module Mounting Tracks & Rails | More Detail
M81714/67 Series II high strength lightweight mounting tracks available in black anodized finish as standard. The spring clip system allows easy insertion and extraction of modules using the M81714/69 removal tools.

M81714 Series I Contacts | More Detail
M81714 Series I Crimp contacts utilise M39029/1 style contacts.

MIL-DTL-39029 Military Contact M39029/1 | More Detail
Pin contact for MIL-T-81714 Series I

M85049/14S E-Nuts | More Detail
M85049/14S E-Nut for MIL-DTL-38999 Series III & IV

Create Part

M85049/15 & M85049/16 Qwik-Ty Strain Reliefs | More Detail
M85049/15 & M85049/16 Qwik-Ty Strain Reliefs for MIL-DTL-38999 Series III & IV

Create Part

M85049/18 EMI/RFI Environmental backshells | More Detail
M85049/18 EMI/RFI Environmental backshells for MIL-DTL-38999 Series III & IV

Create Part

M85049/19 EMI/RFI Non-Environmental backshells | More Detail
M85049/19 EMI/RFI Non-Environmental backshells for MIL-DTL-38999 Series III & IV

Create Part

M85049/20 Crimp Ring Backshell | More Detail
M85049/20 Crimp Ring Backshell for MIL-DTL-38999 Series III & IV

Create Part

M85049/21 Non-Environmental Strain Relief Backshel | More Detail
M85049/21 Non-Environmental Strain Relief Backshells for MIL-DTL-38999 Series III & IV

Create Part

M85049/38 Strain Relief | More Detail
M85049/38 Strain Relief for MIL-DTL-38999 Series III & IV

Create Part

M85049/39 Right Angled Strain Relief | More Detail
M85049/39 Right Angled Strain Relief for MIL-DTL-38999 Series III & IV

Create Part

M85049/69 Shrink Boot Adapter | More Detail
M85049/69 Shrink Boot Adapter for MIL-DTL-38999 Series III & IV

Create Part