19th of May 2012
DRP10 DMC Circular Ring Pliers
 | The DRP-XX circular ring pliers are specifically designed to grip circular connector and backshell components which would be deformed by other gripping methods. The non marring rubber jaw lining material is available in strip form and may be used to replace worn jaw inserts. It is held in place by interlocking fingers which are molded into the material. Suitable for shell size 10/11, Grip Range 17.018 to 17.78mm, Replacement Pads are available (P/N DRP-078R).
£78.94
|
SW4-17S-3TC MIL-DTL-38999 Series III EMI/RFI knit mesh Screen trap adapter with heat shrink boot groove
 | MIL-DTL-38999 Series III, EMI/RFI knit mesh Screen trap adapter with heat shrink boot groove, Aluminium shell, Shell size 17(E), Electroless nickle plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£50.11
|
TDM53744-3000-A100
 | M39029 Straight PCB Power Contact. Pending full description.
£0.86
|
SW4-23T-3TC Straight screen wrap adapter
 | MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post and Tinned copper Braid, Aluminium shell, Electroless Nickel plating, Shell Size 23 (H), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£47.26
|
M85049/51-1-18N MIL-DTL-26482 Series 2, Angled 90° Saddle clamp
| MIL-DTL-26482 Series 2, Angled 90° Saddle clamp, Aluminium, Electroless Nickel finish, Shell size 18, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£11.80
|
M85049/38S19W Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium,Shell size 19(F), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£16.62
|
202M212-19R Raychem Heat shrink Boot adapter
 | MIL-DTL-38999 Series I & II Heat shrink Boot adapter, Aluminium, Cadmium olive drab finish, Shell size 18/19,
£16.25
|
KMAH1-13-1-C-S1-HE EMI/RFI Knitt mesh adapter
 | MIL-DTL-38999 Series 3 & 4 EMI/RFI Knitt mesh adapter with heat shrink boot groove and constant force spring, Aluminium shell,Size 13(C),Electoless nickle plating,Max cable entry 13.6mm
£37.45
|
G8802-17M Glenair MIL-DTL-38999 Series III Angled 90° saddle clamp
 | MIL-DTL-38999 Series III Angled 90° saddle clamp, Aluminium shell, Electroless nickel plating, Shell Size 17(E), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£24.09
|
M85049/38-19W Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 19(F), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£11.50
|
BTD3416-20W Glenair Back nut for heat shrink boot
 | MIL-DTL-26482 Series II, Back nut for heat shrink boot adapter, Aluminium shell, Shell size 20, Cadmium olive drab plating, Connector Designator A : Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£3.50
|
M85049/39S9W MIL-DTL-38999 Series III Angled 90° saddle clamp self locking
 | MIL-DTL-38999 Series III Angled 90° saddle clamp self locking, Aluminium shell, Cadmium olive drab plating, Shell Size 11(B), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£18.25
|
FSU/MD-18A Nut Plate Size 18
| Nut plate,4.40 thread, Shell size 18, RETAINER MATERIAL - .040 +/-.003 THICK 6061-T6 ALUMINIUM ALLOY,NUT, SELF-LOCKING - STEEL, CADMIUM PLATED FOLLOWED BY A SOLID DRYFILM LUBRICANT. NUTS MEET PERFORMANCE REQUIREMENTS OF MIL-N-25027 SPECIFICATION, RETAINER FINISH - ALODINE PER MIL-C-5541.Suitable for connectors MIL-DTL-5015, MIL-DTL-26482, MIL-DTL-38999, NAS1650, MIL-DTL-26500, MIL-DTL-81511, MIL-DTL-83723
£3.00
|
M85049/38S11N Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium,Shell size 11(B), Electroless nickle plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£11.50
|
NCB4-R-21-02-012 MIL-DTL-38999 Series II 90° adapter shell only
 | MIL-DTL-38999 Series II 90° adapter shell only (Converts straight clamps to 90 degrees), Requires clamp to be purchased Separately, Shell Size 21 (G), Cadmium olive drab finish, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.0025
£64.50
|
M85049/95-16A Nut plate Size 16
 | Nut plate ¾ Perimeter, Aluminium alloy, Class A, Size 16, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95-16A, M85528/2-16A01
£6.66
As low as:
£3.15
|
GTR1056-13M MIL-DTL-38999 Series III Angled 90° Qwik-ty adapter
 | MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter, Aluminium shell, Electroless nickle plating , Shell size 13(C), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£49.12
|
MS3417-12N Straight saddle clamp
 | Straight saddle clamp, Aluminium, Electroless nickle plating, Shell size 12, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£2.00
|
10-36565-232 Saddle Clamp Grommet
 | Saddle clamp grommet suitable for size 24 saddle clamp.
£0.90
|
M85049/69-21A Heat shrink boot adapter
 | MIL-DTL-38999 Series III, Heat shrink boot adapter,spin coupling, Aluminium shell, Black anodized,Size 21(G), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£45.71
|
10-36565-101 Saddle Clamp Grommet
 | Saddle clamp grommet suitable for size 8 saddle clamp.
£0.36
|
GTR1054-19N Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter, Aluminium shell,Cadmium Olive Drab plating, Shell Size 19(F), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£34.94
|
10-36565-122 Saddle Clamp Grommet
 | Saddle clamp grommet suitable for size 10 saddle clamp.
£0.50
|
SW4-15T-3NC MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post
 | MIL-DTL-38999 Series III, EMI/RFI knit mesh Screen tyrap adapter with heat shrink boot groove, Aluminium, Shell size 15(D), Electroless nickle plating, Braid type Nickle plated Coppper, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£55.78
|
05-0507-20-70 Metal protective cap MIL-DTL-26482
 | MIL-DTL-26482 , Plug, Metal protective cap with 7 Inch cord and 3.05mm eylet, Bayonet locking, Shell size 20, Aluminum shell, Cadmium olive drab,
£7.90
|
M85049/14S15W MIL-DTL-38999 Series III Back Nut Self Locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 15(D), Cadmium olive drab, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£15.78
|
K503 DMC Positioner
 | M22520/2 Positioner for crimp tool AFM8, For contact M39029/22-192
£47.70
|
M85049/39-13A MIL-DTL-38999 Series III Angled 90° saddle clamp
 | MIL-DTL-38999 Series III Angled 90° saddle clamp, Aluminium shell, Black Anodize plating, Shell Size 13(C), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£17.25
|
TH343
 | M22520/1 Turret Head for AF8 Crimp tool. For us ewith contacts M39029/22-191, M39029/22-192 &M39029/22-605
£104.96
|
GS85049/39-11M MIL-DTL-38999 Series III Angled 90° saddle clamp
 | MIL-DTL-38999 Series III Angled 90° saddle clamp, Aluminium shell, Electroless Nickel plating, Shell Size 1(B), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£11.86
|
K330-3 DMC Positioner
 | M22520/2 Positioner for crimpt tool AFM8, For contacts M39029/22-191
£57.70
|
M85049/95-25A-A Nut Plate Size 25
 | Nut plate ¾ Perimeter, Aluminium alloy, Primer coated, Class A, Size 25, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95
£7.31
As low as:
£3.47
|
K287 DMC M22520/2-11 Positioner
| M22520/2-11 positioner for Crimp tool AFM8 M22520/2-01 Crimps contacts M39029/1-100,/1-101,/2-104,/2-105,/3-107,/3-108
£65.23
|
05-1538-22 Protective cap
 | SPT55SE-22/05-1520-22 Protective cap, Bayonet locking, nickel aluminium bronze , Cadmium olive drab finish
£148.12
|
91H1-13-07-1-ZB-HE100 Screened Emi/Rfi constant force spring adapter
 | Straight, Screened Emi/Rfi constant force spring adapter including Screen termination spring, Including lip for heat shrink boot, Aluminium Shell, Shell size 13(C), Max cable entry 11.10mm, Zinc cobalt olive drab plating, MIL-DTL-38999 Series 3 and 4
£36.80
|
KMAH1-25-1-C-S1-HE EMI/RFI Knitt mesh adapter
 | MIL-DTL-38999 Series 3 & 4 EMI/RFI Knitt mesh adapter with heat shrink boot groove and constant force spring, Aluminium shell,Size 25(J),Electoless nickle plating,Max cable entry 31.5mm
£48.32
|
M81969/14-10 Contact Insertion / Removal Tool
 | Installing/Removal Tool - Plastic composition - Color Code: Red/Orange Installs and Removes Size 20 Pin/Soc Contacts For Connector Series: MIL-C-38999
£1.00
|
05-0415-12-8 EMI/RFI Adapter 360°
 | EMI/RFI Adapter 360°, Aluminium Shell, Cadmium olive drab plating (Non-Rohs), Shell Size 12, Grommet 12-08 layout, Def-Stan 61-12 cables, Suitable for MIL-DTL-26482 Series I, PATTERN 105,BS9522F0017 Solder versions.
£15.24
|
M85049/38S15W Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium,Shell size 15(D), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£16.50
|
GTR1054G-23N Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter with grounding tab
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter with grounding tab, Aluminium shell, cadmium olive drab plating, Shell Size 23(H), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£50.94
|
M85049/38S15N Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium,Shell size 15(D), Electroless nickle plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£16.50
|
91H1-19-11-2-Z-HE200 Polamco Screened EMI/RFI constant force spring adapter
 | MIL-DTL-38999 Series III, Straight EMI/RFI spring ring adapter with groove for heat shrink boot (supplied with spring ring), Nickel Aluminium Marine Bronze shell, Shell Size 19 (F), Max cable entry 17.47mm, Non-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£58.63
|
DTL-HSB-001S103 Heat Shrink Boot
| Straight Standard Lipped Boot With Eyelet, Material Type 1 (High Performance Elastomer), Boot Size 03, Shrinks (24.0-5.0/24.0-10.5mm), No Adhesive.
£4.50
|
GTR1054-11M Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter
 | MIL-DTL-38999 Series III Straight Qwik-ty adapteR, Aluminium shell, Electroless Nickel plating, Shell Size 11(B), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£30.84
|
DRK95-22MB Tool Removal tweezer type, Green/White, for Size 22M &22D Contacts
 | MIL-DTL-38999 Tool Removal tweezer type, Green/White, Size 22M & 22D Contacts, Electrical Connector, Socket, Crimp Removable (for MIL-C-38999 Series I, III, and IV Connectors. (M81969/8-02 Rev B)
£59.30
|
96H1-21-1-ZB Saddle clamp
 | MIL-DTL-38999 Series III ,Saddle clamp, Aluminium, Shell Size 21(G), Zinc cobalt olive drab (Cadmium Free) plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£19.33
|
M39029/1-101 Size 16 Crimp Contact
 | M39029/1-101 Crimp Pin (Male) Size 16 Colour coded Brown/Black/Brown 20-24 AWG (For MIL-T-81714 Terminal Junction System), Crimp tooling required M22520/1-01 (AF8 )plus M22520/1-02 Red (TH1A) or M22520/2-01 (AFM8 ) plus M22520/2-11 (K287), Use Removal tool M18969/14-02
£0.29
|
M85049/16S17N MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter self locking
 | MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter self locking, Aluminium shell, Electroless nickle plating , Shell size 17(E), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£62.32
|
TH452 DMC Turret Use with AF8
 | Turret Use with AF8 (M22520/1/01 Crimpt tool body) suitable for contacts, 030-8588,031-8639-120,031-8557,031-8556,030-8586,030-8587,330-8744,031-8555,031-8688-110,330-8659
£109.08
|
KMH3-21-1-C Polamco MIL-DTL-38999 Series II 90° adapter shell only
 | MIL-DTL-38999 Series II 90° adapter shell only (Converts straight clamps to 90 degrees), Requires clamp to be purchased Separately, Shell Size 21 (G), Electroless Nickel finish, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£80.22
|
M85049/38S13W Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium,Shell size 13(C), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£16.50
|
M85049/14S25N MIL-DTL-38999 Series III Back Nut Self locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 25(J), Electroless Nickel, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£21.34
|
05-3308-1 Contact Reducing Sleeve
 | Contact Reducing Sleeve 24-28AWG for Size 16 contact
£0.80
|
HX4 DMC M22520/5-01 Tool
 | M22520/5-01 Crimp Tool Frame for Y Series Die Sets, Crimps Coax Connectors
£270.00
|
711-0082-02 Amphenol
 | Dummy Contact Pin
£5.00
|
M85049/38-13A Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 13(C), Black anodised, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£11.50
|
M39029/56-348 Size 22D Crimp Contact
| Contact copper gold plated, Crimp termination, Female (Socket), Size 22D Crimp wire range 22-28 Awg, Colour coded Orange/Yellow/Grey, Suitable for connectors MIL-DTL-38999 Series I, III, IV. Crimp tooling required M22520/2-01 plus M22520/2-07, Mating Contact M39029/58.
£0.40
|
M81969/14-03 Contact Insertion / Removal Tool
 | Installing/Removal Tool - Plastic composition - Color Code: Blue/White Installs and Removes Size 16 Pin/Soc Contacts For Connector Series: MIL-C-26482, MIL-C-81703, MIL-C-83723, MIL-C-38999, MIL-T-81714 and MIL-C-5015
£1.00
|
711-0014-3
| 711 Series Data Bus Socket Contact
£26.80
|
M85049/38S23N Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium,Shell size 23(H), Electroless nickle plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£18.25
|
MK14-W14S Crimp Tool Heavy Duty
 | Cimp Tool Hand Heavy Duty, Un-Insulated terminals, Terminal Size 5 , 6 AWG, 14.0 Nom, 5120-99-783-0734
£99.99
|
DRP18 DMC Circular Ring Pliers
 | The DRP-XX circular ring pliers are specifically designed to grip circular connector and backshell components which would be deformed by other gripping methods. The non marring rubber jaw lining material is available in strip form and may be used to replace worn jaw inserts. It is held in place by interlocking fingers which are molded into the material. Suitable for shell size 18/19, Grip Range 28.194 to 28.956mm, Replacement Pads are available (P/N DRP-078R).
£78.94
|
MK13-P2622 Crimp Tool
 | Cimp Tool Hand, Pre-Insulated terminals, Terminal Size 0 , 22-26AWG, 0.5mm Nominal Insulation colour yellow
£99.99
|
M85049/95-25A Nut Plate Size 25
 | Nut plate ¾ Perimeter, Aluminium alloy, Class A, Size 25, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95
£7.31
As low as:
£3.47
|
DRP8 DMC Circular Ring Pliers
 | The DRP-XX circular ring pliers are specifically designed to grip circular connector and backshell components which would be deformed by other gripping methods. The non marring rubber jaw lining material is available in strip form and may be used to replace worn jaw inserts. It is held in place by interlocking fingers which are molded into the material. Suitable for shell size 08/09, Grip Range 14.224 to 14.986mm, Replacement Pads are available (P/N DRP-078R).
£78.94
|
M85049/95-20A Nut Plate Size 20
 | Nut plate ¾ Perimeter, Aluminium alloy, Primer coated, Class A, Size 20, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95-20A, M85528/2-20A01
£6.66
As low as:
£3.15
|
G8801-13N Glenair MIL-DTL-38999 Series III Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 13(C), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£22.00
As low as:
£13.86
|
M85049/95-8A-A Nut Plate Size 8
 | Nut plate ¾ Perimeter, Aluminium alloy, Primer coated, Class A, Size 8, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95
£6.66
As low as:
£3.15
|
M85049/51-1-10W MIL-DTL-26482 Series 2 Angled 90° Saddle clamp
 | MIL-DTL-26482 Series 2, Angled 90° Saddle clamp, Aluminium, Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Shell size 10, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£10.50
|
G8801-9N Glenair MIL-DTL-38999 Series III Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 9(A), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£27.95
|
MS27488-22-2 Size 23-22 Connector Sealing Plug
 | Grommet End Seal Plug - Color Code: Black - Rev N - Latest Revision, Install In Connector Grommet Cavity Size 23-22 For Use With Connectors And Terminal Junction Systems Having Wire Sealing Grommets Conforming To: MIL-DTL-26500, MIL-DTL-28804, MIL-C-29600, MIL-DTL-38999, MIL-C-81511 SERIES 3 & 4, SAE-AS81659
£0.07
|
KMAH1-17-1-C-S1-HE EMI/RFI Knitt mesh adapter
 | MIL-DTL-38999 Series 3 & 4 EMI/RFI Knitt mesh adapter with heat shrink boot groove and constant force spring, Aluminium shell,Size 17(E),Electoless nickle plating,Max cable entry 19.5mm
£42.94
|
MS27488-22 Size 23-22 Connector Sealing Plug
 | Grommet End Seal Plug - Color Code: Black - Rev L, Install In Connector Grommet Cavity Size 23-22 For Use With Connectors And Terminal Junction Systems Having Wire Sealing Grommets Conforming To: MIL-DTL-26500, MIL-DTL-28804, MIL-C-29600, MIL-DTL-38999, MIL-C-81511 SERIES 3 & 4, SAE-AS81659
£0.07
|
EE068-390-0804 MIL-DTL-38999 Series II 90° adapter shell only
 | MIL-DTL-26482 Series II 90° adapter shell only (Converts straight clamps to 90 degrees), Requires clamp to be purchased Separately, Shell Size 8, Electroless Nickel finish, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£57.64
|
MS27488-22-1 Size 23-22 Connector Sealing Plug
 | Grommet End Seal Plug - Color Code: Black - Rev M,Install In Connector Grommet Cavity Size 23-22 For Use With Connectors And Terminal Junction Systems Having Wire Sealing Grommets Conforming To: MIL-DTL-26500, MIL-DTL-28804, MIL-C-29600, MIL-DTL-38999, MIL-C-81511 SERIES 3 & 4, SAE-AS81659
£0.07
|
GS3416-8G-82N Glenair Back nut for heat shrink boot
 | MIL-DTL-26482 Series II, Back nut for heat shrink boot adapter, Aluminium shell, Shell size 8, Cadmium olive drab plating, Connector Designator A : Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£3.90
|
GS3158-08-82N Glenair heat shrink boot adapter
 | Heat shrink boot adapter,spin coupling,Aluminium shell,Olive drab cadmium over nickel base,Size 8, Connector designator A for MIL-DTL-5015 G Series 3,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATT 602
£3.00
|
M85049/69-25AD Heat shrink boot adapter with drain hole
 | MIL-DTL-38999 Series III, Heat shrink boot adapter,spin coupling,Aluminium shell, Drain holes, Black anodized,Size 25(J), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£35.75
|
M81969/14-01 Contact Insertion / Removal Tool
 | Installing/Removal Tool - Plastic composition - Color Code: Green/White Installs and Removes Size 22D/M Pin/Soc Contacts For Connector Series: MIL-C-26482, MIL-C-81703, MIL-C-83723, MIL-C-38999, MIL-T-81714
£1.00
|
G8801-21M Glenair MIL-DTL-38999 Series III Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 21(G), Elctroless nickel, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£15.24
|
M85049/14S15N MIL-DTL-38999 Series III Back Nut Self locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 15(D), Electroless Nickel, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£13.50
|
GTR1056-21N MIL-DTL-38999 Series III Angled 90° Qwik-ty adapter
 | MIL-DTL-38999 Series III Angled 90° Qwik-ty adapter, Aluminium shell, Cadmium olive drab plating, Shell Size 21(G), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£68.00
|
M81969/14-05 Contact Insertion / Removal Tool
 | Installing/Removal Tool - Plastic composition - Color Code: Gray/White Installs and Removes Size 10 Pin/Soc Contacts For Connector Series: MIL-C-38999
£3.50
|
M85049/88-19W03 MIL-DTL-38999 Series III Bandit straight backshell
 | MIL-DTL-38999 Series III Bandit straight backshell, Aluminium shell, Cadmium olive drab plating, Shell Size 19(F), Max cable entry 19.1mm Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£48.66
|
M81969/14-04 Contact Insertion / Removal Tool
 | Installing/Removal Tool - Plastic composition - Color Code: Yellow/White Installs and Removes Size 12 Pin/Soc Contacts For Connector Series: MIL-C-26482, MIL-C-81703, MIL-C-83723, MIL-C-38999, MIL-T-81714 and MIL-C-5015
£1.00
|
M85049/39S23N MIL-DTL-38999 Series III Angled 90° saddle clamp self locking
 | MIL-DTL-38999 Series III Angled 90° saddle clamp self locking, Aluminium shell, Electroless Nickel finish, Shell Size 23(H), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£23.62
|
M81969/1-02 Contact Insertion / Removal Tool
 | Installing/Removal Tool - Plastic body metal tip composition - Color Code: Green/White Installs and Removes Size 22 Pin/Soc Contacts For Connector Series: MIL-DTL-24308 and MIL-DTL-81659.
£5.64
|
M85049/16S19N MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter self locking
 | MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter self locking, Aluminium shell, Electroless nickle plating , Shell size 19(F), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£62.32
|
DRK83-12 Metal removal tool Size 12 Yellow/White
 | Metal removal tool Size 12 Yellow/White
£58.55
|
GTR1054-13NF Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter, Aluminium shell,Cadmium Olive Drab plating, Shell Size 13(C), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£30.84
|
SB104B521 Accessory set with clamp
 | MK17 Pattern104 Accessory set with clamp, Brass, Cadmium olive drab finish, Shell Size 1 Small,
£6.50
|
G8802-11M Glenair MIL-DTL-38999 Series III Angled 90° saddle clamp
 | MIL-DTL-38999 Series III Angled 90° saddle clamp, Aluminium shell, Electroless nickel plating, Shell Size 11(B), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£10.50
|
DRP20 DMC Circular Ring Pliers
 | The DRP-XX circular ring pliers are specifically designed to grip circular connector and backshell components which would be deformed by other gripping methods. The nonmarring rubber jaw lining material is available in strip form and may be used to replace worn jaw inserts. It is held in place by interlocking fingers which are molded into the material. Suitable for shell size 20/21, Grip Range 32.258 to 33.02mm, Replacement Pads are available (P/N DRP-078R).
£78.94
|
96H1-25-1-ZB Saddle clamp
 | MIL-DTL-38999 Series III ,Saddle clamp, Aluminium, Shell Size 25(J), Zinc cobalt olive drab (Cadmium Free) plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£19.33
|
DRP-078R DMC Replacement Pads for DRP Circular Ring Pliers
 | Replacement Pads for DRP Circular Ring Pliers,This replacement pad is supplied as a 4.25" strip that must be cut to length needed.
£6.12
|
M85049/39-17A MIL-DTL-38999 Series III Angled 90° saddle clamp
 | MIL-DTL-38999 Series III Angled 90° saddle clamp, Aluminium shell, Black Anodize plating, Shell Size 17(E), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£15.90
|
DRK16A DMC M81969/19-08 (REV A) Metal Removal Tool
 | M81969/19-08 (REV A) Metal Removal tool for Size 16 contacts, Blue , Connectors MIL-DTL-26500, MIL-DTL-26482 Series 1.
£46.16
|
G8801-11N Glenair MIL-DTL-38999 Series III Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 11(B), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£11.00
|
DAK16B DMC Metal Insertion tool for Size 16 contacts, Blue, M81969/17-04 (REV B)
 | Metal Insertion tool for Size 16 contacts, Blue, M81969/17-04 (REV B), Connectors MIL-DTL-26500, MIL-DTL-26482 Series 1.
£46.16
|
GS85049/69-15N Glenair MIL-DTL-38999 Series III Heat shrink boot adapter
 | MIL-DTL-38999 Series III Heat shrink boot adapter, spin coupling,aluminium shell, Cadmium olive drab over electroless nickle plating(500Hr Salt spray) (Non-Rohs), Size 15(D), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£15.65
|
K496 DMC Positioner
 | Positioner for M39029/1-507 Contacts. USe with Crimp tool AMF8 (M22520/2-02)
£58.91
|
KTKK-2473 Raychem Spin nut adpter with pre moulded screened boot
 | Spin nut adpter with pre moulded screened boot, Aluminium Shell, Cadmium olive drab, Shell Size 14, Connector Designator A : Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£24.00
|
DTL-BNC/TNC-G Square Flange Gasket
| BNC/TNC Square Flange Gasket, Neoprene, 1.5mm Thick
£2.98
|
M85049/1815W02 MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp
 | MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp, Aluminium shell, Cadmium olive drab finish, Shell Size 15(D),Min/ Max cable entry 3.2/ 6.4mm Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£46.11
|
001104 200 02
 | Contact Pin Size 20 (18-24 AWG)
£1.50
|
M85049/14S21W MIL-DTL-38999 Series III Back Nut Self Locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 21(G), Cadmium olive drab, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£21.34
|
M39029/92-533 Size 16 Crimp Contact
| Contact copper gold plated, Crimp termination, Female (Socket), Size 16 Crimp wire range 16-20 Awg, Colour coded Green/Orange/Orange, Suitable for connectors MIL-R-6106, MIL-S-12883. Crimp tooling required M22520/1-01 (AF8) plus M22520/1-02 Blue, Use Removal/Insert tool M81969/14-03
£2.50
|
M85049/14S11W MIL-DTL-38999 Series III Back Nut Self Locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 11(B), Cadmium olive drab, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£12.54
|
600019-16-12 Back Nut Deutsch
 | MIL-DTL-26482 Series 2,Back nut, Aluminium shell, Cadmium olive drab plating (Non-Rohs), Shell size16, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£1.50
|
91H3-17-16-1-ZB-HE300 Screened Emi/Rfi constant force spring adapter
 | MIL-DTL-38999 Series III, Angled 90°, Screened Emi/Rfi, Constant force spring adapter including Screen termination spring, Including lip for heat shrink boot, Aluminium Shell,Shell size 17(E),Max cable entry 25.4mm, Zinc cobalt olive drab (Cadmium free), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£62.58
|
M39029/4-110 Size 20 Crimp Contact
| Contact copper gold plated, Crimp termination, Male (Pin), Size 20, Crimp wire range 20-24 Awg, Colour coded Brown/Brown/Black, Suitable for connector series MIL-DTL-26482 Series II, Pattern 602, MIL-DTL-81703 Series III, MIL-DTL-83723 Series III, MIL-DTL-83733, Crimp tooling required M22520/1-01 plus M22520/1-02 Red, Mating contact M39029/5
£0.54
|
97H3-11-4-J Polamco Angled 90° Heat shrink boot adapter
 | MIL-DTL-38999 Series III,Angled 90° Heat shrink boot adapter, Spin coupling, Stainless steel Passivate shell, Shell Size 11(B), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£76.38
|
600036-08 Bush for saddle clamp jaws Shell size 08
| MIL-DTL-26482 series 2, Bush for saddle clamp jaws, Shell size 8, MIL-DTL-26482 series II,PAN 6432-1, PAN 6432-2,PATTERN 602
£1.80
|
M85049/39-9A MIL-DTL-38999 Series III Angled 90° saddle clamp
 | MIL-DTL-38999 Series III Angled 90° saddle clamp, Aluminium shell, Black Anodize plating, Shell Size 9(A), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£10.25
|
450FA001N14 Glenair Qwik-ty strain relief 90 degree
 | Qwik-ty strain relief 90°, Aluminium, Cadmium olive drab plating over electroless nickel, Size 14/15, Suitable for MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE30909
£62.80
|
NCB4-S-13-03-ST/11 MIL-DTL-38999 Series III EMI/RFI braid trap with heat shrink boot groove adapter
 | MIL-DTL-38999 Series III, EMI/RFI braid trap with heat shrink boot groove adapter, Aluminium, Electroless nickle plating, Shell size 13(C) cable entry step down to size 11(B), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£66.49
|
SN-201-F24-3N Nut Plate Size 24
| Nut plate Size 24, black anodized,Teflon locking pins, M3 mounting holes
£2.47
|
450HS001NF11 Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter, Aluminium shell,Cadmium Olive Drab plating, Shell Size 11(B), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£57.30
|
SW4-13T-3NC MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post
 | MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post and Nickle plated copper Braid, Aluminium shell, Electroless nickle plating, Shell Size 13 (C), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£54.08
|
M85049/38S17W Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium,Shell size 17(E), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£16.62
|
100P796-23-1-B-GC401
 | MIL-DTL-38999 Series III , Anti-decoupling protection cap for receptacle with 4 inch nylon cord and eylet, Shell size 23(H), in aluminium, with cadmium, olive drab finish, Non-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£65.23
|
GS85049/38-11M Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 11(B), Electroless nickle plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£11.50
|
DRK266J Metal Removal tool, Yellow, Contacts size 22D
 | Metal Removal tool, Yellow, Contacts size 22D
£63.65
|
GTR1056G-23M Glenair MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter with grounding lug
 | MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter with grounding lug, Aluminium shell, Electroless nickle plating , Shell size 23(H), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£49.12
|
DRK111-8 11-7880-8 Metal Removal Tool Size 8 MIL-DTL-26482 Series 1
 | 11-7880-8 Metal Removal Tool Size 8 MIL-DTL-26482 Series 1
£61.78
|
DRP14 DMC Circular Ring Pliers
 | The DRP-XX circular ring pliers are specifically designed to grip circular connector and backshell components which would be deformed by other gripping methods. The non marring rubber jaw lining material is available in strip form and may be used to replace worn jaw inserts. It is held in place by interlocking fingers which are molded into the material. Suitable for shell size 14/15, Grip Range 22.606 to 23.368mm, Replacement Pads are available (P/N DRP-078R).
£78.94
|
M85049/38-11W Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 11(B), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£11.50
|
M39029/63-368 Size 20HD Crimp Contact
| Contact copper gold plated Crimp termination,Female (Socket), Size 20HD Crimp wire range 20-24, Colour coded Orange/Blue/Grey, Suitable for connectors MIL-DTL-24308. Crimp tooling required Inner contact: M22520/2-01 (AFM8) plus M22520/2-08 (K13-1) Use Inert/Removal tool M81969/1-02 or M81969/14-02, Mating Contact M39029/64
£0.45
|
M85049/1811W03 MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp
 | MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp, Aluminium shell, Cadmium olive drab finish, Shell Size 11(B),Min/ Max cable entry 6.4/ 9.5mm Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£69.97
|
M85049/95-12A Nut Plate Size 12
 | Nut plate ¾ Perimeter, Aluminium alloy, Class A, Size 12, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion resistant alloy steel. AS85049/95-12A, M85528/2-12A01
£6.66
As low as:
£3.15
|
100P604-23-1-B-GC-3-5-3 MIL-DTL-38999 Series III Protective cap to fit Receptacle
 | MIL-DTL-38999 Series III, Protective cap to fit Receptacle, Aluminium Shell, Shell size 23(H), Cadmium olive drab plating, Nylon green cord 3.5 inches with 3.2mm eylet.
£12.35
|
M85049/95-24A Nut Plate Size 24
 | Nut plate ¾ Perimeter, Aluminium alloy, Class A, Size 24, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95-24A, M85528/2-24A01
£7.31
As low as:
£3.47
|
208M708-19B04 Raychem EMI/RFI adapter with braid MIL-DTL-38999
 | MIL-DTL-38999 Series III, EMI/RFI adapter with braid attached including heat shrink boot grove, Aluminium, Shell , Shell size 9(A), Cadmium olive drab over electroless nickle , Max cable entry 6.35mm, Non-rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£9.00
|
M85049/95-19A Nut Plate Size 19
 | Nut plate ¾ Perimeter, Aluminium alloy, Class A, Size 19, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95-19A, M85528/2-19A01
£6.66
As low as:
£3.15
|
208M714-19B08 Raychem EMI/RFI adapter with braid attached including heat shrink boot grove
 | MIL-DTL-38999 Series III, EMI/RFI adapter with braid attached including heat shrink boot grove, Aluminium, Shell size 15(D), Cadmium olive drab over electroless nickle,Max cable entry 12.7mm, Non-rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£12.50
|
M85049/95-12A-A Nut Plate Size 12
 | Nut plate ¾ Perimeter, Aluminium alloy, Primer coated, Class A, Size 12, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95
£6.66
As low as:
£3.15
|
NCB3-S-12-02-ST/10 New Chapel Straight EMI/RFI screened trap adapter
 | MIL-DTL-26482 Series II, Straight EMI/RFI screened trap adapter with heat shrink boot lip, Aluminium shell size 12 step down to size 10, Cadmium olive drab plating.
£19.00
|
M85049/95-20A-A Nut Plate Size 20
 | Nut plate ¾ Perimeter, Aluminium alloy, Primer coated, Class A, Size 20, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95
£6.66
As low as:
£3.15
|
DM53742-16 D-Sub Coax Crimp contact 50Ω Socket RG174,1RG188,RG316
| D-Sub Coax Crimp contact 50Ω , Socket (Female), Gold over copper 50 μ", Suitable for cables RG174,188,316
£4.00
|
131J10019X Conec Size 8 Solder bucket termination Male Pin
 | Size 8 precision machined contacts (50 Micons Gold), 10 Amp rating, Wire Size 16-20Awg, Solder bucket termination, Male(Pin)
£3.00
|
M39029/1-507 Size 20 Crimp Contact
| M39029/1-507 Crimp Pin (Male) Size 20 Colour coded Green/Black/Violet 22 AWG (For MIL-T-81714 Terminal Junction System), Crimp tooling required M22520/2-01 (AFM8 ) plus M22520/2-32 (K496) ,Use Removal tool M18969/14-01
£0.30
|
KMAH1-09-1-C-S1-HE050 EMI/RFI Knitt mesh adapter
 | MIL-DTL-38999 Series 3 & 4 EMI/RFI Knitt mesh adapter with heat shrink boot groove and constant force spring, Aluminium shell,Size 9(A),Electoless nickle plating,Max cable entry 6.8mm
£26.70
|
MS3448-001C
| Removal Tool Probe Tip - Plastic composition - Color Code: Yellow Removes Size 12 Unwired Electrical Contacts From Connector Series: MIL-C-5015, MIL-C-26482, MIL-C-81511 Class L, MIL-C-81703, MIL-C-83723 and MIL-C-83733
£13.22
|
KMAH1-17-1-B-S1-HE EMI/RFI Knitt mesh adapter
 | MIL-DTL-38999 Series 3 & 4 EMI/RFI Knitt mesh adapter with heat shrink boot groove and constant force spring, Aluminium shell,Size 17(E),Cadmium olive drab plating,Max cable entry 19.5mm
£42.94
|
852-02G08 Souriau MIL-DTL-26482 Series II Straight saddle clamp
 | MIL-DTL-26482 Series II, Straight saddle clamp, Aluminium, Cadmium olive drab over electroless nickle plating, Shell size 8, Non-Rohs, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 6025 G
£7.50
|
KMAH1-25-1-B-S1-HE EMI/RFI Knitt mesh adapter
 | MIL-DTL-38999 Series 3 & 4 EMI/RFI Knitt mesh adapter with heat shrink boot groove and constant force spring, Aluminium shell,Size 25(J),Cadmium olive drab plating,Max cable entry 31.5mm
£48.32
|
21-33123-546 Size 12 Coax Crimp Contact
| Contact copper gold plated Crimp termination, Female (Socket), Size 12 Coax wire range RG174,RG179,RG316, Colour coded Yellow/Brown/Blue, Suitable for connectors MIL-DTL-38999 Series I,II,II,IV. Crimp Tool required Inner: M22520/2-01 (AFM8) & M22520/2-34 (K323) Outer M22520/31-01 (GS200-1) plus M22520/31-02 ( G2P330) Use Insert/Removal tool M81969/14-04, Mating Contact M39029/28
£15.00
|
G8354-8N Glenair MIL-DTL-26482 Series II Straight saddle clamp
 | MIL-DTL-26482 Series II, Straight saddle clamp, Cadmium olive drab plating, Shell size 8, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£23.05
|
MS3448-001B
| Removal Tool Probe Tip - Plastic composition - Color Code: Blue Removes Size 16 Unwired Electrical Contacts From Connector Series: MIL-C-5015, MIL-C-26482, MIL-C-81511 Class L, MIL-C-81703, MIL-C-83723 and MIL-C-83733
£13.22
|
M85049/51S24W MIL-DTL-26482 Series II Angled 90° Saddle Clamp
 | MIL-DTL-26482 Series 2, Angled 90° Saddle clamp self locking, Aluminium, Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Shell size 24, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£7.00
|
MS3448-001A
 | Removal Tool Probe Tip - Plastic composition - Color Code: Red Removes Size 20 Unwired Electrical Contacts From Connector Series: MIL-C-5015, MIL-C-26482, MIL-C-81511 Class L, MIL-C-81703, MIL-C-83723 and MIL-C-83733
£13.22
|
M85049/52S8W
 | MIL-DTL-26482 Series 2, Straight Strain Relief, Aluminium shell, Self locking, Cadmium olive drab plating, Size 8, MIL-DTL-5015 Series 3400,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,400M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11,
£13.50
|
KMH3-23-1-C Polamco MIL-DTL-38999 Series II 90° adapter shell only
 | MIL-DTL-38999 Series II 90° adapter shell only (Converts straight clamps to 90 degrees), Requires clamp to be purchased Separately, Shell Size 23 (H), Electroless Nickel finish, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£80.22
|
99A1-08-1-B Polamco Low Profile Heat Shrink Boot Backshell
 | MIL-DTL-26482 Series II, Low Profile Heat Shrink Boot Backshell (NON-SCREENED) Fixed backshell for open wire bundles w/o strain relief, Shell Size 8, Cadmium olive drab finish, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£5.09
|
M85049/1817N06 MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp
 | MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp, Aluminium shell, Electroless nickel finish, Shell Size 17(E),Min/ Max cable entry 15.9/ 19.1mm Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£45.21
|
GS85049/38-25M Glenair MIL-DTL-38999 Series III Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 25(J), Elctroless nickel, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£18.50
|
GTR1054-23NF Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter, Aluminium shell,Cadmium Olive Drab plating, Shell Size 23(H), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£25.26
|
KTKK-1117 Raychem MIL-DTL-38999 Series III Spin nut adapter with pre moulded screened boot
 | Spin nut adapter with pre moulded screened boot, Aluminium Shell, Cadmium olive drab, Shell Size 23(G), Connector Designator H : Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£93.62
|
620HA0011NF11 MIL-DTL-38999 Series III Angled 90° saddle clamp
 | MIL-DTL-38999, 90° saddle clamp , Aluminium shell, Size 11(B), Cadmium olive drab platiing, Connector Designator H: Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£10.25
|
WNC4-23T-3TC Straight screen wrap adapter
 | MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post and Tinned copper Braid, Aluminium shell, Electroless Nickel plating, Shell Size 23 (H), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£47.26
|
D100P248-13-1ZB D38999 Series III Receptacle protection cap
 | MIL-DTL-38999 Series III ,Receptacle protection cap, Shell size 13(C), Threaded, Aluminium Shell, Zinc cobalt olive drab finish (Cadmium Free), No attachments
£12.50
|
311HS001NF2308 Glenair MIL-DTL-38999 Series III EMI/RFI braid trap adapter with groove for heat shrink boot
 | MIL-DTL-38999 Series III, EMI/RFI braid trap adapter with groove for heat shrink boot, Aluminium shell, Cadmium olive drab finish, Size 23(G), Cable entry 25.4mm Max, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£170.32
|
209M416-19C Raychem MIL-DTL-38999 Series III Heat shrink boot adapter
 | MIL-DTL-38999 Series III Heat shrink boot adapter, spin coupling,aluminium shell, Electroless nickle plating, Size 17(E), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£6.50
|
WNC4-23T-2TC Straight screen wrap adapter
 | MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post and Tinned copper Braid, Aluminium shell, Cadmium olive drab plating, Shell Size 23 (H), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£47.26
|
600027-18-12 MIL-DTL-26482 Series 2 Angled 90° saddle clamp
 | MIL-DTL-26482 Series 2, Angled 90° saddle clamp, Aluminium shell, Cadmium olive drab plating (Non-Rohs), Shell size 18, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£6.25
|
610HS011N21 Glenair MIL-DTL-38999 Series III Back nut
 | MIL-DTL-38999 Series III, Back nut , Aluminium, Shell size 21(G), Cadmium olive drab over electroless nickle, Non-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£10.92
|
600036-18 Bush for saddle clamp jaws Shell size 18
 | MIL-DTL-26482 series 2, Bush for saddle clamp jaws, Shell size 18, MIL-DTL-26482 series II,PAN 6432-1, PAN 6432-2,PATTERN 602
£2.50
|
132C11039X Conec Socket High Power 30-Amp Crimp D-Sub
 | Size 8 precision machined contacts High Power contact machined, Female (Socket), Crimp, 30 Amp, 10-12 AWG, 30µin Gold over nickel, Class 1 (500 Cycles)
£2.10
As low as:
£1.20
|
600027-16-12 Deutsch MIL-DTL-26482 Series 2 Angled 90° saddle clamp
 | MIL-DTL-26482 Series 2, Angled 90° saddle clamp, Aluminium shell, Cadmium olive drab plating (Non-Rohs), Shell size 16, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£6.03
|
G8802-21M Glenair MIL-DTL-38999 Series III Angled 90° saddle clamp
 | MIL-DTL-38999 Series III Angled 90° saddle clamp, Aluminium shell, Electroless nickel plating, Shell Size 21(G), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£12.70
|
600027-14-12 Deutsch MIL-DTL-26482 Series 2 Angled 90° saddle clamp
 | MIL-DTL-26482 Series 2, Angled 90° saddle clamp, Aluminium shell, Cadmium olive drab plating (Non-Rohs), Shell size 14, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£6.03
|
G8801-21N Glenair MIL-DTL-38999 Series III Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 21(G), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£22.16
|
G8801-13NC Glenair MIL-DTL-38999 Series III Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 13(C), Zinc cobalt olive drab finish (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£20.62
|
M85049/38-23A Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 23(H), Black anodised, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£11.50
|
KPT81-22C ITT CANNON Protective cap and chain with eyelet for recptacle
 | Protective cap and chain with eyelet for recptacle, Bayonet locking, Aluminium Shell, Shell Size 22, Cadmium olive drab plating, Suitable for MIL-DTL-26482 Series 1 & 2.
£5.00
|
GS85049/69-19N Glenair MIL-DTL-38999 Series III Heat shrink boot adapter
 | MIL-DTL-38999 Series III Heat shrink boot adapter, spin coupling,aluminium shell, Cadmium olive drab over electroless nickle plating(500Hr Salt spray) (Non-Rohs), Size 19(F), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£15.65
|
165X10119X Dsub slide lock size 9 to 37 hoods.
 | D-Sub Hood Accessy, Arrow headed locks for slide locks, Suitable for size 9 to 37 way hoods. ( 2 pcs per connector required), Steel nickel plated.
£0.52
|
GTR1054-13N Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter, Aluminium shell,Cadmium Olive Drab plating, Shell Size 13(C), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£30.84
|
165X11279X D-Sub Plastic Hood with slide lock shell size 9
 | D-Sub Plastic Hood supplied with slide lock, Shell Size 9, Top & Side entry, Max cable entry 6mm, Integrated strain relief, Material: Plastic hood ABS, UL94v-0
£3.64
As low as:
£2.55
|
GTR1054G-9M Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter with grounding tab
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter with grounding tab, Aluminium shell, Electroless Nickel plating, Shell Size 9(A), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£25.63
|
620HS011M23 Glenair MIL-DTL-38999 Series III Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 23(H), Elctroless nickel, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£15.24
|
GTR1054G-13M Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter with grounding tab
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter with grounding tab, Aluminium shell, Electroless Nickel plating, Shell Size 13(C), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£52.32
|
MS27488-4-1 Size 4 Connector Sealing Plug
 | Grommet End Seal Plug - Color Code: Blue - Rev M, Install In Connector Grommet Cavity Size 4 For Use With Connectors And Terminal Junction Systems Having Wire Sealing Grommets Conforming To: MIL-DTL-5015
£0.58
|
GTR1054-21N Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter, Aluminium shell,Cadmium Olive Drab plating, Shell Size 21(G), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£34.94
|
GTR1054G-21N Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter with grounding tab
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter with grounding tab, Aluminium shell, cadmium olive drab plating, Shell Size 21(G), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£15.23
|
96H1-19-1-ZB Saddle clamp
 | MIL-DTL-38999 Series III ,Saddle clamp, Aluminium, Shell Size 19(F), Zinc cobalt olive drab (Cadmium Free) plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£19.33
|
G8802-21N MIL-DTL-38999 Series III Angled 90° saddle clamp
 | MIL-DTL-38999 Series III Angled 90° saddle clamp, Aluminium shell, Cadmium olive drab plating, Shell Size 21(G), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£9.21
|
96H1-23-1-ZB Saddle clamp
 | MIL-DTL-38999 Series III ,Saddle clamp, Aluminium, Shell Size 23(H), Zinc cobalt olive drab (Cadmium Free) plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£19.33
|
318HY213N1503 Glenair
| MIL-DTL-38999 Series III, Angled 90° saddle clamp, Aluminium shell, Cadmium olive drab,Shell Size 15(D), Non-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£25.63
|
GS85049/69-17N Glenair MIL-DTL-38999 Series III Heat shrink boot adapter
 | MIL-DTL-38999 Series III Heat shrink boot adapter, spin coupling,aluminium shell, Cadmium olive drab over electroless nickle plating(500Hr Salt spray) (Non-Rohs), Size 17(E), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£15.65
|
KA0200-32-25W5-25 KEC MIL-DTL-38999 Series III EMI/RFI Straight Screen trap adapter
| MIL-DTL-38999 Series III, EMI/RFI Straight Screen trap adapter with heat shrink boot groove, Aluminium, Shell size 25 (J), 40.3 mm long, Cadmium olive drab plating, Max cable entry 27.0mm, Non-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£35.26
|
G8801-17N Glenair MIL-DTL-38999 Series III Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 17(E), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£19.23
|
450HA001N21 Glenair MIL-DTL-38999 Series III Angled 90° Qwik-ty adapter
 | MIL-DTL-38999 Series III, Angled 90° Qwik-Ty strain relief, Aluminium shell, Cadmium olive drab over electroless nickle, 1000hr salt spray, Shell size 21 (G), NON-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£19.52
|
GTR1054G-17N Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter with grounding tab
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter with grounding tab, Aluminium shell, cadmium olive drab plating, Shell Size 17(E), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£28.44
|
450HA001NF23 Glenair MIL-DTL-38999 Series III Angled 90° Qwik-ty adapter
 | MIL-DTL-38999 Series III, Angled 90° Qwik-Ty strain relief, Aluminium shell, Cadmium olive drab over electroless nickle, 1000hr salt spray, Shell size 23 (H), NON-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£19.52
|
ISOHJ150NF1703-S ISODYNE MIL-DTL-D38999 Series III EMI/RFI Spring band backshell 90° Degree
 | MIL-DTL-D38999 Series III EMI/RFI Spring band backshell 90° Degree, Cadmium olive drab over electroless nickle (500hr salt spray), Shell size 17, Max cable entry 9.5mm, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£131.20
|
GTR1055G-19N Glenair MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter with grounding lug
 | MIL-DTL-38999 Series III, Angled 45° Qwik-ty adapter with grounding lug, Aluminium shell, Cadmium olive drab plating , Shell size 19(F), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£26.53
|
KMH2-11-1-C Polamco MIL-DTL-38999 Series II 45° adapter shell only
 | MIL-DTL-38999 Series II 45° adapter shell only (Converts straight clamps to 45 degrees), Requires clamp to be purchased Separately, Shell Size 11 (B), Electroless Nickel finish, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£50.40
|
208M724-19B12 Raychem MIL-DTL-38999 Series III EMI/RFI adapter with braid
 | MIL-DTL-38999 Series III, EMI/RFI adapter with braid attached including heat shrink boot grrove, Aluminium, Shell size 25(J), Cadmium olive drab over electroless nickle,Max cable entry 19.05, Non-rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£56.32
|
388HS171NF15-02 Glenair MIL-DTL-38999 Series III Straight screen wrap adapter with heat shrink boot groove
 | MIL-DTL-38999 Series III Straight screen wrap adapter with heat shrink boot groove and Tinned copper Braid, Aluminium shell, Step down to size 11, Max cable entry 11.8mm, Cadmium olive drab plating, Shell Size 15 (D), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£69.72
|
610HS011N25 Glenair MIL-DTL-38999 Series III Back nut
 | MIL-DTL-38999 Series III, Back nut , Aluminium, Shell size 25(J), Cadmium olive drab over electroless nickle, Non-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£9.50
|
KMH3-13-1-C Polamco MIL-DTL-38999 Series II 90° adapter shell only
 | MIL-DTL-38999 Series II 90° adapter shell only (Converts straight clamps to 90 degrees), Requires clamp to be purchased Separately, Shell Size 13 (C), Electroless Nickel finish, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£58.42
|
610HS011N17 Glenair MIL-DTL-38999 Series III Back nut
 | MIL-DTL-38999 Series III, Back nut , Aluminium, Shell size 17(E), Cadmium olive drab over electroless nickle, Non-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£6.25
|
KMH3-17-1-C Polamco MIL-DTL-38999 Series II 90° adapter shell only
 | MIL-DTL-38999 Series II 90° adapter shell only (Converts straight clamps to 90 degrees), Requires clamp to be purchased Separately, Shell Size 17 (E), Electroless Nickel finish, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£58.42
|
100P602-22-1-B-GC-4-22 Polamco Protective cap for receptacle
 | Protective cap for receptacle with 4 inch nylon cord and large ring 37mm attachment, Bayonet locking, Aluminium , Shell size 22, Cadmium olive drab, Non-Rohs, Suitable for ,MIL-DTL-26482 Series 1 & 2, PAN 6432-1, PATTERN 602
£12.50
|
M85049/79-15W04 MIL-DTL-38999 Series III Angled 90° Enviromental EMI/RFI backshell with saddle clamp
 | MIL-DTL-38999 Series III Angled 90° Enviromental EMI/RFI backshell with saddle clamp, Aluminium shell, Shell Size 15(D), Cadmiuum Olive Drab plating, Cable range Min 9.5mm Max 12.7mm, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£84.38
|
100P796-23-1-B-GC401 Polamco MIL-DTL-38999 Series III Anti-decoupling protection cap
 | MIL-DTL-38999 Series III , Anti-decoupling protection cap for receptacle with 4 inch nylon cord and eylet, Shell size 23(H), in aluminium, with cadmium, olive drab finish, Non-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£40.00
|
M85049/1815W03 MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp
 | MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp, Aluminium shell, Cadmium olive drab finish, Shell Size 15(D),Min/ Max cable entry 6.4/ 9.5mm Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£69.97
|
209M418-19B Raychem MIL-DTL-38999 Series III Heat shrink boot adapter
 | MIL-DTL-38999 Series III, Heat shrink boot adapter, Aluminium shell, Shell size 19(F), Cadmium olive drab over electroless nickle plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£6.50
|
M85049/39-15W MIL-DTL-38999 Series III Angled 90° saddle clamp
 | MIL-DTL-38999 Series III Angled 90° saddle clamp, Aluminium shell, Cadmium olive drab plating, Shell Size 15(D), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£19.85
|
91H1-11-12-1-C-HE300 Screened Emi/Rfi constant force spring adapter
 | Straight, Screened Emi/Rfi,constant force spring adapter including Screen termination spring, Including lip for heat shrink boot, Aluminium Shell,Shell size 11(B),Max cable entry 19.05mm,Electroless nickle plating, MIL-DTL-38999 Series 3 and 4
£49.56
|
M85049/14S25W MIL-DTL-38999 Series III Back Nut Self Locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 25(J), Cadmium olive drab, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£21.34
|
M39029/35-275 Size 16 Crimp Contact
| Contact copper gold plated Crimp termination, Female (Socket), Size 16 Crimp wire range 20-24Awg, Colour coded Red/Violet/Green, Suitable for connectors MIL-DTL-28748/4, MIL-DTL-28748/14 Crimp tooling required M22520/1-01 (AF8) plus M22520/1-03 Blue/Red (TH4) Use Insert tool M81969-18-01, Removal tool M81969/20-01, Mating Contact M39029/34
£0.30
|
M85049/14S21N MIL-DTL-38999 Series III Back Nut Self locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 21(G), Electroless Nickel, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£21.34
|
MHDTZK25-K D-Sub hood EMI/RFI zinc die cast shell size 25
 | D-Sub Hood EMI/RFI Light weight zinc die cast shell, nickel plated over copper. Turned full metal 4-40UNC thumbscrews, Sheel Size 25, Min cable 4.3mm, Max cable 13mm. Attenuation better than 40dB over the range 30MHz to 1GHz.
£2.99
As low as:
£1.00
|
M85049/14S9N MIL-DTL-38999 Series III Back Nut Self Locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 9(A), Electroless Nickel finish, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£18.50
|
GS3416-12G-82N Glenair Back nut
 | MIL-DTL-26482 , Back nut, Aluminium, Cadmium olive drab (Non-Rohs),Shell size12, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£4.85
|
M85049/14S17N MIL-DTL-38999 Series III Back Nut Self locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 17(E), Electroless Nickel, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£17.85
|
600027-20-12 MIL-DTL-26482 Series 2 Angled 90° saddle clamp
 | MIL-DTL-26482 Series 2, Angled 90° saddle clamp, Aluminium shell, Cadmium olive drab plating (Non-Rohs), Shell size 20, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£5.00
|
98A1-20-1B POLAMCO MIL-DTL-26482 Series 2 Back nut
 | MIL-DTL-26482 Series 2,Back nut, Aluminium shell, Cadmium olive drab over electroless nickel plating 500Hr salt spray (Non-Rohs), Shell size20, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£4.50
|
600027-24-12 MIL-DTL-26482 Series 2 Angled 90° saddle clamp
 | MIL-DTL-26482 Series 2, Angled 90° saddle clamp, Aluminium shell, Cadmium olive drab plating (Non-Rohs), Shell size 24, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£5.85
|
96H1-17-1-ZB Saddle clamp
 | MIL-DTL-38999 Series III ,Saddle clamp, Aluminium, Shell Size 17(E), Zinc cobalt olive drab (Cadmium Free) plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£19.33
|
600036-16 Bush for saddle clamp jaws Shell size 16
 | MIL-DTL-26482 series 2, Bush for saddle clamp jaws, Shell size 16, MIL-DTL-26482 series II,PAN 6432-1, PAN 6432-2,PATTERN 602
£1.80
|
GTR1056G-21N Glenair MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter with grounding lug
 | MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter with grounding lug, Aluminium shell, Cadmium olive drab plating , Shell size 21(G), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£49.12
|
600231 Crimp Contact Deutsch
 | Contact copper gold plated, Crimp termination, Male (Pin), Size 16, Crimp wire range 20-16 Awg, Colour coded Blue/Blue, Suitable for connector series MIL-DTL-26482 Series II, Pattern 602, MIL-DTL-81703 Series III, MIL-DTL-83723 Series III, MIL-DTL-83733, Crimp tooling required M22520/1-01 plus M22520/1-02 Blue, Mating contact 600234
£0.18
|
BTH1-13-06-1-ZB-SB MIL-DTL-38999 Series III Banding strap adaptor including standard strap
 | MIL-DTL-38999 Series III Banding strap adaptor including standard strap, Aluminum shell, 9.52mm max cable entry, Zinc cobalt olive drab plating, Shell size 13(C), MIL-DTL-38999 Series III,MIL-DTL-38999 Series IV
£37.05
|
160X11189X D-Sub Die-cast Cable clamp
 | D-Sub Die-cast Cable clamp to fit Size 9/15/25/37 hoods
£2.50
|
GS85049/69-13N Glenair MIL-DTL-38999 Series III Heat shrink boot adapter
 | MIL-DTL-38999 Series III Heat shrink boot adapter, spin coupling,aluminium shell, Cadmium olive drab over electroless nickle plating(500Hr Salt spray) (Non-Rohs), Size 13(C), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£15.65
|
ATM283-24 Nut Plate Size 24
 | Nut plate, Flange mounting 3/4,Shell Size24, Clinch nuts M3 cadmium plated
£4.80
|
SW4-11T-3NC MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post
 | MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post and Nickle plated copper Braid, Aluminium shell, Electroless nickle plating, Shell Size 11 (B), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£53.65
|
M39029/56-349 Size 22M Crimp Contact
 | Contact copper gold plated, Crimp termination, Female (Socket), Size 22M Crimp wire range 24-28 Awg, Colour coded Orange/Yellow/White, Suitable for connectors MIL-DTL-38999 Series I, III, IV. Crimp tooling required M22520/2-01 plus M22520/2-07, Mating Contact M39029/58.
£1.50
|
GS85049/69-11N Glenair MIL-DTL-38999 Series III Heat shrink boot adapter
 | MIL-DTL-38999 Series III Heat shrink boot adapter, spin coupling,aluminium shell, Cadmium olive drab over electroless nickle plating(500Hr Salt spray) (Non-Rohs), Size 11(B), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£15.65
|
M39029/56-349 Size 22M Crimp Contact
| Contact copper gold plated, Crimp termination, Female (Socket), Size 22M Crimp wire range 24-28 Awg, Colour coded Orange/Yellow/White, Suitable for connectors MIL-DTL-38999 Series I, III, IV. Crimp tooling required M22520/2-01 plus M22520/2-07, Mating Contact M39029/58.
£0.95
|
M85049/38-13W Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 13(C), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£12.00
|
DM53742-5 D-Sub Coax Crimp contact 50Ω Socket RG58,RG141
| D-Sub Coax Crimp contact 50Ω , Socket (Female), Gold over nickel ,Suitable for cables RG58,RG141
£8.53
|
M81969/14-07 Contact Insertion / Removal Tool
 | Installing/Removal Tool - Plastic composition - Color Code: Blue Installs and Removes Size 4 Pin/Soc Contacts For Connector Series: MIL-C-26482, MIL-C-81703, MIL-C-83723, MIL-C-38999, MIL-T-81714 and MIL-C-5015
£3.70
|
M81969/14-11 Contact Insertion / Removal Tool
 | Installing/Removal Tool - Plastic composition - Color Code: Red/White Installs and Removes Size 20 Pin/Soc Contacts For Connector Series: MIL-C-26482, MIL-C-81703, MIL-C-83723, MIL-T-81714 and MIL-C-5015
£1.00
|
M85049/14S11N MIL-DTL-38999 Series III Back Nut Self locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 11(B), Electroless Nickel, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£17.63
|
550402 Pico Size 22 Removal Tool,Yellow
| Size 22 Removal Tool, Yellow
£35.96
|
M85049/38S13N Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium,Shell size 13(C), Electroless nickle plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£11.50
|
M81969/14-02 Contact Insertion / Removal Tool
 | Installing/Removal Tool - Plastic composition - Color Code: Red/White Installs and Removes Size 20 Pin/Soc Contacts For Connector Series: MIL-C-26482, MIL-C-81703, MIL-C-83723, MIL-C-38999, MIL-T-81714 and MIL-C-5015
£1.00
|
M85049/38S21N Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium,Shell size 21(G), Electroless nickle plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£17.50
|
M85049/52-1-8W MIL-DTL-26482 Series II Straight saddle clamp
 | MIL-DTL-26482 Series II, Straight saddle clamp, Aluminium, Cadmium olive drab over electroless nickle plating, Shell size 8, Non-Rohs, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£9.50
|
M85049/38S25N Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium,Shell size 25(J), Electroless nickle plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£22.15
|
CT9 D-Sub 2 Piece Top entry Cover Size 9 (E)
 | D-Sub 2 Piece Top entry Cover Thermoplastic UL94V-0, Black, Jack Screws 4-40UNC, Shell Size 9 (E), Max cable entry 6.15mm. (2x screws and nuts supplied)
£0.50
|
WNC4-11T-2TC Straight screen wrap adapter
 | MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post and Tinned copper Braid, Aluminium shell, Cadmium olive drab plating, Shell Size 11 (B), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£39.72
|
165X10469X D-Sub Hood Single Piece Side Entry
 | D-sub cover, Shell Size 37, Single piece design, Side cable entry, Black Plastic polyamide 6.6, UL94 V-0, Supplied with strain relief & set of screws.
£3.50
|
GTR1056G-25M Glenair MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter with grounding lug
 | MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter with grounding lug, Aluminium shell, Electroless nickle plating , Shell size 25(J), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£49.12
|
MS27291-5 Straight saddle clamp size 18
 | MIL-DTL-26500, Straight saddle clamp, Aluminium shell, Black Anodize plating (Non-Conductive), Shell size 18, MIL-DTL-26500
£2.00
|
M39029/1-102 Size 14 Crimp Contact
| M39029/1-102 Crimp Pin (Male) Size 14 Colour coded Brown/Black/Red 16 AWG (For MIL-T-81714 Terminal Junction System), Crimp tooling required M22520/1-01 (AF8 )plus M22520/1-02 Blue (TH1A) ,Use Removal tool M18969/14-03
£0.65
|
M39029/4-110 Size 20 Crimp Contact
| Contact copper gold plated, Crimp termination, Male (Pin), Size 20, Crimp wire range 20-24 Awg, Colour coded Brown/Brown/Black, Suitable for connector series MIL-DTL-26482 Series II, Pattern 602, MIL-DTL-81703 Series III, MIL-DTL-83723 Series III, MIL-DTL-83733, Crimp tooling required M22520/1-01 plus M22520/1-02 Red, Mating contact M39029/5
£0.54
|
DRP16 DMC Circular Ring Pliers
 | The DRP-XX circular ring pliers are specifically designed to grip circular connector and backshell components which would be deformed by other gripping methods. The non marring rubber jaw lining material is available in strip form and may be used to replace worn jaw inserts. It is held in place by interlocking fingers which are molded into the material. Suitable for shell size 16/17, Grip Range 26.67 to 27.432mm, Replacement Pads are available (P/N DRP-078R).
£78.94
|
M39029/1-102 Size 14 Crimp Contact
| M39029/1-102 Crimp Pin (Male) Size 14 Colour coded Brown/Black/Red 16 AWG (For MIL-T-81714 Terminal Junction System), Crimp tooling required M22520/1-01 (AF8 )plus M22520/1-02 Blue (TH1A) ,Use Removal tool M18969/14-03
£0.80
|
DRP12 DMC Circular Ring Pliers
 | The DRP-XX circular ring pliers are specifically designed to grip circular connector and backshell components which would be deformed by other gripping methods. The non marring rubber jaw lining material is available in strip form and may be used to replace worn jaw inserts. It is held in place by interlocking fingers which are molded into the material. Suitable for shell size 12/13, Grip Range 20.32 to 21.082mm, Replacement Pads are available (P/N DRP-078R).
£78.94
|
SN-201-F8N Nut Plate
 | Nut plate Size 8, Black anodized with an ISO M3 thread. Teflon locking pins.
£2.00
|
G8967-14N Glenair Dummy Stowage Receptacle
 | Dummy stowage receptacle, Bayonet locking, Aluminium shell, Shell size 14, Cadmium olive drab over electroless nickle, Non-Rohs, Suitable for JN1003, STT, SJT, 8ST, HDJ & PAN6433-2 Connectors
£35.00
|
MS3417-18N Straight Saddle Clamp
 | Straight saddle clamp, Aluminium, Electroless nickle plating, Shell size 18, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£5.00
|
M85049/95-18A Nut Plate Size 18
 | Nut plate ¾ Perimeter, Aluminium alloy, Class A, Size 18, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95-18A, M85528/2-18A01
£6.66
As low as:
£3.15
|
GTR87-14N Glenair Qwik-ty strain relief 90 degree
 | Qwik-ty strain relief 90°, Aluminium, Cadmium olive drab plating over electroless nickel, Size 14/15, Suitable for MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE30909
£56.21
|
M85049/95-16A-A Nut plate Size 16
 | Nut plate ¾ Perimeter, Aluminium alloy, Primer coated, Class A, Size 16, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion resistant alloy steel. AS85049/95
£6.66
As low as:
£3.15
|
M85049/63-14W Qwik-ty strain relief 90 degree
| Spin coupling Qwik-Ty 90 degree strain relief for MIL-DTL-38999 Series I & II, Non self-locking, Aluminium shell size 14 (Series I shell size 15), 500 Hour cadmium olive drab over electroless nickel plating,
£56.21
|
M85049/95-10A-A Nut Plate Size 10
 | Nut plate ¾ Perimeter, Aluminium alloy, Primer coated, Class A, Size 10, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95.
£6.66
As low as:
£3.15
|
10-40450-16S Gasket Shielded Size-16
 | Gasket Shielded, Size 16, This flat gasket is provided to give the maximum in connector performance. Its special feature is in providing the maximum radio shielding under difficult conditions of high receiver sensitivity and low signal strength while retaining the sealing characteristics of the plain gasket.This gasket is for use with the flange mounting receptacle.
£1.50
|
M85049/95-24A-A Nut Plate Size 24
 | Nut plate ¾ Perimeter, Aluminium alloy, Primer coated, Class A, Size 24, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95
£7.31
As low as:
£3.47
|
380FB001N1606A Glenair EMI/RFI Non-environmental 45° backshell
| MIL-DTL-38999 Series I & II, EMI/RFI Non-environmental 45° backshell, Aluminium, Shell size 16/17, Max cable entry 11.1mm, Cadmium olive drab plating, Non-Rohs, Suitable for MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309
£50.00
|
M85049/95-22A Nut Plate Size 22
| Nut plate ¾ Perimeter, Aluminium alloy, Class A, Size 22, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95-22A, M85528/2-22A01
£6.66
As low as:
£3.15
|
M39029/87-476 Size 20 Crimp Contact
| Contact Thermocouple Chromel, Male (Pin), Crimp termination, Size 20 Crimp wire range 20-24 Awg, Colour coded Yellow/Violet/Blue, Suitable for connectors MIL-DTL-24308, MIL-DTL-38999 Series I,II,III,IV, MIL-DTL-83733 Crimp tooling required M22520/2-01 plus M22520/2-10, Use Insert/Removal tool M81969/14-02 , Mating Contact M39029/88, M39029/89.
£18.50
|
M85049/95-19A-A Nut Plate Size 19
 | Nut plate ¾ Perimeter, Aluminium alloy, Primer coated, Class A, Size 19, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95
£6.66
As low as:
£3.15
|
M39029/87-475 Size 20 Crimp Contact
| Contact Thermocouple Alumel, Male (Pin), Crimp termination, Size 20 Crimp wire range 20-24 Awg, Colour coded Yellow/Violet/Green, Suitable for connectors MIL-DTL-24308, MIL-DTL-38999 Series I,II,III,IV, MIL-DTL-83733 Crimp tooling required M22520/2-01 plus M22520/2-10, Use Insert/Removal tool M81969/14-02 , Mating Contact M39029/88, M39029/89.
£18.50
|
M85049/95-18A-A Nut Plate Size 18
 | Nut plate ¾ Perimeter, Aluminium alloy, Primer coated, Class A, Size 18, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95
£6.66
As low as:
£3.15
|
FHAM-801 Nut Plate Size 8 Auto Sport
| Nut plate, Flange mounting Auto Sport, Shell Size 8, Clinch nuts M3 cadmium plated
£2.74
|
M85049/95-14A Nut Plate Size 14
 | Nut plate ¾ Perimeter, Aluminium alloy, Class A, Size 14, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel.AS85049/95-14A, M85528/2-14A01
£6.66
As low as:
£3.15
|
FSM1-1701 Nut Plate Size17
| Nut plate, Flange mounting 3/4,Shell Size17, Clinch nuts M3 cadmium plated
£7.58
|
M85049/95-8A Nut Plate Size 8
| Nut plate ¾ Perimeter, Aluminium alloy, Class A, Size 8, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95
£6.66
As low as:
£3.15
|
FSM1-1301 Nut Plate Size13
| Nut plate, Flange mounting 3/4,Shell Size13, Clinch nuts M3 cadmium plated
£7.58
|
M85049/95-22A-A Nut Plate Size 22
 | Nut plate ¾ Perimeter, Aluminium alloy, Primer coated, Class A, Size 22, Nut thread 4-40unc, Nut-Self-locking clinch type, Corrosion steel. AS85049/95-22A-A, M85528/2-22A01A
£6.66
As low as:
£3.15
|
M39029/4-114 Size 12 Crimp Contact
| Contact copper gold plated, Crimp termination, Male (Pin), Size 12,Reduced crimp barrel, Crimp wire range Awg, Colour coded Brown/Brown/Yellow, Suitable for connector series MIL-DTL-26482 Series II, Pattern 602, MIL-DTL-81703 Series III, MIL-DTL-83723 Series III, MIL-DTL-83733, Crimp tooling required M22520/1-01 plus M22520/1-02 Yellow, Mating contact M39029/5
£2.50
|
MS3180-10C Protective Plug Cap
 | Protective Plug Cap with Link Chain, Bayonet locking, Aluminium shell, Cadmium olive drab plating, Lanyard length 3.0 Inches, Shell Size 10, Attachment style: Eyelet, Not suitable for B,C,D,E,F Keyways Suitable for LMH,PT,PTSE,AB06,AB05,62GB,162GB,SLPT,IPT,MIL-DTL-26482 ,BS9522F0017, BS9522N0001,Pattern 105,Pattern 603, Pattern 602.
£15.20
|
165X11309X D-Sub Plastic Hood with slide lock shell size 37
 | D-Sub Plastic Hood supplied with slide lock, Shell Size 37, Top & Side entry, Max cable entry 11mm, Integrated strain relief, Material: Plastic hood ABS, UL94v-0
£5.06
As low as:
£3.54
|
DCC-12 Black D-Sub Plug Cap Conductive Size 15P
 | D-Sub Plug Cap Conductive Polyethylene Copolymer (EVA), Shell Size 15P (A), Colour Black.
£0.80
As low as:
£0.44
|
M39029/4-111 Size 16 Crimp Contact
| Contact copper gold plated, Crimp termination, Male (Pin), Size 16, Crimp wire range 20-16 Awg, Colour coded Brown/Brown/Brown, Suitable for connector series MIL-DTL-26482 Series II, Pattern 602, MIL-DTL-81703 Series III, MIL-DTL-83723 Series III, MIL-DTL-83733, Crimp tooling required M22520/1-01 plus M22520/1-02 Blue, Mating contact M39029/5
£0.34
|
M85049/38S9W Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium,Shell size 9(A), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£16.23
|
600231 Crimp Contact Deutsch
 | Contact copper gold plated, Crimp termination, Male (Pin), Size 16, Crimp wire range 20-16 Awg, Colour coded Blue/Blue, Suitable for connector series MIL-DTL-26482 Series II, Pattern 602, MIL-DTL-81703 Series III, MIL-DTL-83723 Series III, MIL-DTL-83733, Crimp tooling required M22520/1-01 plus M22520/1-02 Blue, Mating contact 600234
£0.25
|
KMAH1-09-1-ZB-S1-HE050 EMI/RFI Knitt mesh adapter
 | MIL-DTL-38999 Series 3 & 4 EMI/RFI Knitt mesh adapter with heat shrink boot groove and constant force spring, Aluminium shell,Size 9(A),Zinc Cobalt Cadmium Free Olive drab over electroless nickle plating (Cadmium Free),Max cable entry 6.8mm
£26.70
|
600036-24 Bush for saddle clamp jaws Shell size 24
 | MIL-DTL-26482 series 2, Bush for saddle clamp jaws, Shell size 24, MIL-DTL-26482 series II,PAN 6432-1, PAN 6432-2,PATTERN 602
£3.90
|
KMAH1-11-1-C-S1-HE EMI/RFI Knitt mesh adapter
 | MIL-DTL-38999 Series 3 & 4 EMI/RFI Knitt mesh adapter with heat shrink boot groove and constant force spring, Aluminium shell,Size 11(B),Electoless nickle plating,Max cable entry 10.3mm
£39.30
|
600036-16 Bush for saddle clamp jaws Shell size 16
 | MIL-DTL-26482 series 2, Bush for saddle clamp jaws, Shell size 16, MIL-DTL-26482 series II,PAN 6432-1, PAN 6432-2,PATTERN 602
£2.50
|
KMAH1-15-1-B-S1-HE EMI/RFI Knitt mesh adapter
 | MIL-DTL-38999 Series 3 & 4 EMI/RFI Knitt mesh adapter with heat shrink boot groove and constant force spring, Aluminium shell,Size 15(D),Cadmium olive drab plating, Max cable entry 16.3mm
£41.68
|
600036-14 Bush for saddle clamp jaws Shell size 14
 | MIL-DTL-26482 series 2, Bush for saddle clamp jaws, Shell size 14, MIL-DTL-26482 series II,PAN 6432-1, PAN 6432-2,PATTERN 602
£2.50
|
KMAH1-15-1-C-S1-HE EMI/RFI Knitt mesh adapter
 | MIL-DTL-38999 Series 3 & 4 EMI/RFI Knitt mesh adapter with heat shrink boot groove and constant force spring, Aluminium shell,Size 15(D),Electoless nickle plating,Max cable entry 16.3mm
£41.68
|
600036-20 Bush for saddle clamp jaws Shell size 20
 | MIL-DTL-26482 series 2, Bush for saddle clamp jaws, Shell size 20, MIL-DTL-26482 series II,PAN 6432-1, PAN 6432-2,PATTERN 602
£2.50
|
KMAH1-21-1-C-S1-HE EMI/RFI Knitt mesh adapter
 | MIL-DTL-38999 Series 3 & 4 EMI/RFI Knitt mesh adapter with heat shrink boot groove and constant force spring, Aluminium shell,Size 21(G),Electoless nickle plating,Max cable entry 25.2mm
£45.56
|
600036-22 Bush for saddle clamp jaws Shell size 22
 | MIL-DTL-26482 series 2, Bush for saddle clamp jaws, Shell size 22, MIL-DTL-26482 series II,PAN 6432-1, PAN 6432-2,PATTERN 602
£3.90
|
KMAH1-23-1-C-S1-HE EMI/RFI Knitt mesh adapter
 | MIL-DTL-38999 Series 3 & 4 EMI/RFI Knitt mesh adapter with heat shrink boot groove and constant force spring, Aluminium shell,Size 23(H),Electoless nickle plating,Max cable entry 28.3mm
£49.56
|
600036-08 Bush for saddle clamp jaws Shell size 08
| MIL-DTL-26482 series 2, Bush for saddle clamp jaws, Shell size 8, MIL-DTL-26482 series II,PAN 6432-1, PAN 6432-2,PATTERN 602
£2.50
|
165X10139X D-Sub Two-part plastic hood
 | D-Sub Two-part plastic hood Integrated cable clamping, Shell Size 9, Material: - Plastic hood black: Polyamide + Glas filled, UL 94 V-0 Fastening:- 4-40 UNC jack screw
£1.06
|
600027-12-12 Deutsch MIL-DTL-26482 Series 2 Angled 90° saddle clamp
 | MIL-DTL-26482 Series 2, Angled 90° saddle clamp, Aluminium shell, Cadmium olive drab plating (Non-Rohs), Shell size 12, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£6.03
|
M85049/31-8W MIL-DTL-26482 Series II Back nut
 | MIL-DTL-26482 Series II, Back nut, Aluminium shell, Cadmium olive drab over electroless nickel plating 500Hr salt spray (Non-Rohs), Shell size 8, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£6.25
|
600026-18-12 Deutsch Straight saddle clamp
| MIL-DTL-26482 Series 2, Straight saddle clamp, Aluminium shell, Cadmium olive drab plating (Non-Rohs), Shell size 18, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£7.50
|
M85049/51S20W MIL-DTL-26482 Series II Angled 90° Saddle Clamp
 | MIL-DTL-26482 Series 2, Angled 90° Saddle clamp self locking, Aluminium, Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Shell size 20, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£25.36
|
600019-16-12 Back Nut Deutsch
 | MIL-DTL-26482 Series 2,Back nut, Aluminium shell, Cadmium olive drab plating (Non-Rohs), Shell size16, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£2.20
|
GS3418-10N MIL-DTL-26482 Series 2, Angled 90° Saddle clamp
 | MIL-DTL-26482 Series 2, Angled 90° Saddle clamp, Aluminium, Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Shell size 10, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£4.50
|
05-0120-20-16 MIL-DTL-26482 Series 1 Environmental Saddle Clamp
 | MIL-DTL-26482 Series 1 Environmental saddle clamp, Shell Size 16, Suitable for insert layouts 20-16 with solder bucket contacts, Aluminium shell, Cadmium olive drab finish, Pattern105, BS9522F0017 A2103-20-16.
£5.50
|
MS3417-16N Straight Saddle Clamp
 | Straight saddle clamp, Aluminium, Electroless nickle plating, Shell size 16, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£2.50
|
508/2/03547/002 AB Connectors Ukan contact pin size 16, Silver plated
 | Ukan contact pin size 16, Silver plated
£2.50
|
GTR62-8N Glenair Straight Qwik Ty
 | MIL-DTL-26482 Series II, Straight Qwik-ty adapter, Aluminium shell, Cadmium olive drab plating, Shell Size 8, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£18.18
|
MS27488-16 Size 16 Connector Sealing Plug
 | Grommet End Sealing Plug - Color Code: Blue- Rev L, Install In Connector Grommet Cavity Size 16 For Use With Connectors And Terminal Junction Systems Having Wire Sealing Grommets Conforming To: MIL-C-5015, MS3100, MS3400 & MS3450 SERIES, MIL-C-25955, MIL-C-26482, SERIES 1 & 2, MIL-C-26500, MIL-C-26518, MIL-C-28731, MIL-C-28748, MIL-C-28840, MIL-C-38999 ALL SERIES, MIL-C-81511 SERIES 3 & 4, MIL-C-81582, MIL-C-81659 SERIES 2, MIL-C-81703 SERIES 3, MIL-T-81714
£0.08
|
GS3416-8G-82N Glenair Back nut for heat shrink boot
 | MIL-DTL-26482 Series II, Back nut for heat shrink boot adapter, Aluminium shell, Shell size 8, Cadmium olive drab plating, Connector Designator A : Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£5.09
|
MS27488-12-2 Size 12 Connector Sealing Plug
 | Grommet End Seal Plug - Color Code: Orange - Rev N - Latest Revision, Install In Connector Grommet Cavity Size 12 For Use With Connectors And Terminal Junction Systems Having Wire Sealing Grommets Conforming To: MIL-DTL-26482 SERIES 1 & 2, MIL-DTL-26500, MIL-DTL-26518, MIL-C-29600, MIL-DTL-38999 ALL SERIES, MIL-C-81511 SERIES 3 & 4, MIL-C-81582, SAE-AS81659, MIL-C-81703, SAE-AS81714, MIL-DTL-83527, MIL-DTL-83538, MIL-DTL-83723 SERIES II & III
£0.10
|
05-0415-12-3
 | EMI/RFI Adapter 360°, Aluminium Shell, Cadmium olive drab plating (Non-Rohs), Shell Size 12, Grommet 12-03 layout, Def-Stan 61-12 cables, Suitable for MIL-DTL-26482 Series I, PATTERN 105,BS9522F0017 Solder versions.
£15.24
|
132C11049X Socket High Power 40-Amp Crimp D-Sub
 | Size 8 precision machined contacts Quality class 1 (30 Micons Gold) 500 cycles, 40 Amp rating, Wire Size 8-10 Awg, Crimp termination, Female(Socket)
£2.75
As low as:
£1.68
|
JN1043N25A Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 25(A), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£25.62
|
131C11049X Pin High Power 40-Amp Crimp D-Sub
 | High Power contact machined, Male (Pin), Crimp, 40 Amp, 8-10 AWG, 30µin Gold over nickel, Class 1 (500 Cycles)
£4.00
As low as:
£1.89
|
620HS011M25 Glenair MIL-DTL-38999 Series III Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 25(J), Elctroless nickel, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£18.50
|
165X16549X D-Sub Plastic Hood with slide lock shell size 50
 | D-Sub Plastic Hood supplied with slide lock, Shell Size 50, Top & Side entry, Max cable entry 13mm, Integrated strain relief, Material: Plastic hood ABS, UL94v-0
£6.50
As low as:
£4.86
|
KTKK-1127 Raychem MIL-DTL-38999 Series III adapter and 45° shielded heat shrink boot
 | Spin nut adapter with pre moulded 45°screened boot, Aluminium Shell, Cadmium olive drab, Shell Size 23(G), Connector Designator H : Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£92.64
|
165X11299X D-Sub Plastic Hood with slide lock shell size 25
 | D-Sub Plastic Hood supplied with slide lock, Shell Size 25, Top & Side entry, Max cable entry 10mm, Integrated strain relief, Material: Plastic hood ABS, UL94v-0
£4.40
As low as:
£3.08
|
KTKK-1113 Raychem Spin nut adpter with pre moulded screened boot
 | Spin nut adapter with pre moulded screened boot, Aluminium Shell, Cadmium olive drab, Shell Size 15(D), Connector Designator H : Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£87.67
|
165X11289X D-Sub Plastic Hood with slide lock shell size 15
 | D-Sub Plastic Hood supplied with slide lock, Shell Size 15, Top & Side entry, Max cable entry 8mm,Integrated strain relief, Material: Plastic hood ABS, UL94v-0
£3.82
As low as:
£2.60
|
KMH2-23-1-C Polamco MIL-DTL-38999 Series II 45° adapter shell only
 | MIL-DTL-38999 Series II 45° adapter shell only (Converts straight clamps to 45 degrees), Requires clamp to be purchased Separately, Shell Size 23 (G), Electroless Nickel finish, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£97.36
|
165X11379X D-Sub Plastic Hood Metallized with slide lock shell size 25
 | D-Sub Plastic Hood Metallized supplied with slide lock, Shell Size 25, Top & Side entry, Max cable entry 10mm, Integrated strain relief, Material: Plastic hood ABS, UL94v-0
£6.72
As low as:
£4.70
|
NCB4-R-23-02-012 MIL-DTL-38999 Series II 90° adapter shell only
 | MIL-DTL-38999 Series II 90° adapter shell only (Converts straight clamps to 90 degrees), Requires clamp to be purchased Separately, Shell Size 23 (H), Cadmium olive drab finish, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.0025
£65.54
|
5935-14-314-5735 Nut Plate Size 10
| NUT PLATE SIZE 10, M3 THREAD, SN-201-F10N
£2.00
|
311HS001M1702 Glenair MIL-DTL-38999 Series III EMI/RFI braid trap adapter with groove for heat shrink boot
 | MIL-DTL-38999 Series III, EMI/RFI braid trap adapter with groove for heat shrink boot, Aluminium shell, Size 17(E), Cable entry 9.5mm Max, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£58.36
|
311HS039M2509E Glenair MIL-DTL-38999 Series III EMI/RFI Straight braid trap adapter
 | MIL-DTL-38999 Series III, EMI/RFI Straight braid trap adapter with saddle clamp and heatshink boot groove, Aluminium shell, Electroless nickle finish, Shell size 25(J), Max cable entry 9.5mm, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£89.00
|
GTR1054G-25N Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter with grounding tab
 | MIL-DTL-38999 Series III, Stright Qwik-Ty strain relief with grounding lug, Aluminim,Shell size 25(J), Cadmium olive drab over electroless nickle plating, Non-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£51.80
|
SN-201-F20N Nut Plate Size 20
| Nut plate Size 20, black anodized,Teflon locking pins, M3 mounting holes
£2.00
|
WNC4-21T-2TC Straight screen wrap adapter
 | MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post and Tinned copper Braid, Aluminium shell, Cadmium olive drab plating, Shell Size 21 (G), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£47.80
|
GTR112G-8N Glenair Straight Qwik-Ty clamp with grounding lug
 | Straight Qwik-Ty clamp with grounding lug, Aluminium shell, Shell size 8, Cadmium olive drab plating, Connector Designator A : Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£12.50
|
311HA001NF2308 Glenair MlL-DTL-38999 Series III 90° Angled EMI/RFI Braid trap adapter
 | MlL-DTL-38999 Series III 90° Angled EMI/RFI Braid trap adapter, Aluminium shell, Cadmium olive drab finish , Shell Size 23(H), Max cable entry 25.4mm Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£192.12
|
GTR64-20N Glenair Straight Qwik-Ty clamp
 | Straight Qwik-Ty clamp, Aluminium shell, Shell size 20/21, Cadmium olive drab plating, Connector Designator F: Suitable for MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309
£4.00
|
GTR1056-21NF MIL-DTL-38999 Series III Angled 90° Qwik-ty adapter
 | MIL-DTL-38999 Series III, Angled 90° Qwik-Ty strain relief, Aluminium shell, Cadmium olive drab over electroless nickle, 1000hr salt spray, Shell size 21 (G), NON-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£68.00
|
M85049/52S16W MIL-DTL-26482 Series 2 Straight Strain Relief
 | MIL-DTL-26482 Series 2, Straight Strain Relief, aluminium shell, Self locking, 500 Hr salt spray cadmium olive drab over electroless nickle plating,size16,MIL-DTL-5015 Series 3400,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,400M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11
£5.00
|
M85049/1821W03A MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp
 | MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp, Aluminium shell, Cadmium olive drab finish, Shell Size 21(G),Min/ Max cable entry 6.4/ 9.5mm Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£49.24
|
M85049/52-1-20A MIL-DTL-26482 Series 2 Straight Saddle Clamp
 | MIL-DTL-26482 Series 2, Straight saddle clamp, Aluminium, Black anodize (Non-Conductive), Shell size 20, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£5.00
|
388HS164NF21-07 Straight screen wrap adapter
 | MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post and Tinned copper Braid, Aluminium shell, Cadmium olive drab plating, Shell Size 21 (G), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£106.02
|
GTR87-16N Glenair Qwik-ty strain relief 90 degree
 | Qwik-ty strain relief 90 degree,aluminium,cadmium olive drab plating over electroless,size 16/17,Suitable for MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309
£6.00
|
132C11029X Socket High Power 20-Amp Crimp D-Sub
 | Size 8 precision machined contacts Quality class 1 (30 Microns Gold) 500 Cycles, 20 Amp rating, Wire Size 12-14Awg, Crimp termination, Female(Socket)
£1.84
As low as:
£1.08
|
KA0200-86-12J-10C KEC EMI/RFI Angled 90° Screen trap adapter with saddle clamp
 | MIL-DTL-38999 Series I & II, EMI/RFI Angled 90° Screen trap adapter with saddle clamp and heat shrink boot groove, Aluminium, Shell size 12 /13, Electroless nickle plating, Max cable entry 8.1mm, Suitable for MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309
£10.00
|
G8802-21N MIL-DTL-38999 Series III Angled 90° saddle clamp
 | MIL-DTL-38999 Series III Angled 90° saddle clamp, Aluminium shell, Cadmium olive drab plating, Shell Size 21(G), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£19.85
|
91F1-10-04-1-B-HE050 Polamco RFI/EMI spring ring adapter
 | RFI/EMI spring ring adapter including spring ring and heat shrink boot grove, Aluminium shell, Cadmium olive drab plating (Non-Rohs), Shell Size 10/11, Max cable entry 11.10mm ,Suitable for MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309.
£10.00
|
G8802-19N MIL-DTL-38999 Series III Angled 90° saddle clamp
 | MIL-DTL-38999 Series III Angled 90° saddle clamp, Aluminium shell, Cadmium olive drab plating, Shell Size 19(F), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£19.85
|
S2029-28-34 Sunbank Backshell extender
 | MIL-DTL-38999 Series I & II, Backshell extender, Aluminium, Shell size 24/25, Cadmium olive drab plating, Suitable for MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309
£11.00
|
WNC4-19T-2TC Straight screen wrap adapter
 | MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post and Tinned copper Braid, Aluminium shell, Cadmium olive drab plating, Shell Size 15 (D), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£47.80
|
GTR62-18M Glenair Straight Qwik Ty
 | Straight Qwik Ty,Aluminium Shell, Electroless nickle plating, Shell size 18, Connector Designator A :Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£12.50
|
G8801-19N Glenair MIL-DTL-38999 Series III Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 19(F), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£22.16
|
418618-8 Deutsch Dummy receptacle
 | Dummy receptacle Bayonet locking, Shell size 8, Normal keyway, Aluminium shell,cadmium olive drab plating, Suitable for MIL-DTL-26482 Series 1 & 2, MIL-DTL-83723 Series I & III, PAN 6432-1, PATT 602
£15.72
|
M85049/39S19W MIL-DTL-38999 Series III Angled 90° saddle clamp self locking
 | MIL-DTL-38999 Series III Angled 90° saddle clamp self locking, Aluminium shell, Cadmium olive drab plating, Shell Size 19(F), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£19.50
|
MS27670B-24 D38999 Series I & II Right Angle Size 24/25 Backshell
 | MIL-DTL-38999 Series I & II, Angled 90° Qwik-Ty strain relief, Aluminium, Shell size 24/25, Cadmium olive drab over electroless nickle, Non-Rohs, Suitable for MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309
£16.25
|
M85049/38-21W Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 19(F), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£11.50
|
MS27670B-16 D38999 I & II Right Angle Size 16/17 Backshell
 | MIL-DTL-38999 Series I & II, Angled 90° Qwik-Ty strain relief, Aluminium, Shell size 16/17, Cadmium olive drab over electroless nickle, Non-Rohs, Suitable for MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309
£16.25
|
G8414-19N Glenair MIL-DTL-38999 Series III Heat shrink boot adapter
 | MIL-DTL-38999 Series III Heat shrink boot adapter, spin coupling,aluminium shell, Cadmium olive drab over electroless nickle plating(500Hr Salt spray) (Non-Rohs), Size 19(F), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£15.65
|
650HS010N09 Glenair Dummy receptacle
 | MIL-DTL-38999 Series III ,Dummy receptacle, Size 9(A), Aluminium shell, Cadmium olive drab over electroless nickle plating (500Hr salt spray), Non-Rohs
£20.00
|
M85049/16S21N MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter self locking
 | MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter self locking, Aluminium shell, Electroless nickle plating , Shell size 21(G), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£62.32
|
GTR117-20N Glenair 90° Qwik-ty long body adapter
 | MIL-DTL-26482 Series II, 90° Qwik-ty long body adapter, Aluminium shell, Cadmium olive drab, Shell size 20, Connector Designator A : Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£21.00
|
GTR1054-11N Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter, Aluminium shell,Cadmium Olive Drab plating, Shell Size 11(B), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£30.84
|
388FS164M24-09 Glenair EMI/RFI Knit mesh Qwik-ty backshell
 | MIL-DTL-38999 Series I & II, EMI/RFI Knit mesh Qwik-ty backshell, Aluminium, Shell size 24/25, Electroless nickle plating, Suitable for MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309
£25.00
|
GTR1054-25M Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter, Aluminium shell, Electroless Nickel plating, Shell Size 25(J), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , C
£38.60
|
10-553974-09G Amphenol Dummy Stowage Receptacle
 | MIL-DTL-38999 Series III ,Dummy Stowage Receptacle,Shell Size 9(A), Aluminium shell, Electroless nickle plating,Suitable for MIL-DTL-38999 Series III ,EN3645 , CECC 75201.002
£25.00
|
GTR1054G-9B Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter with grounding tab
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter with grounding tab, Aluminium shell, cadmium olive drab plating, Shell Size 9(A), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£28.44
|
G7056-25NF Glenair Angled 90° EMI/RFI Split backshell with Qwik-ty
 | MIL-DTL-38999 Series I & II, Angled 90° EMI/RFI Split backshell with Qwik-ty, Aluminimum, Shell size 24/25, Cadmium olive drab over electroless nickle plating, Non-Rohs, Suitable for MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309
£26.33
|
GTR1054-9N Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter, Aluminium shell, Cadmium olive drab plating, Shell Size 9(A), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£25.63
|
KTKK-2081 Raychem Angled adapter and shielded heat shrink boot
 | 90° Angled adapter and shielded heat shrink boot, Aluminium shell,Size 10, Cadmium olive drab plating, Suitable for JN1003, SJT, 8ST, HDJ connectors
£31.00
|
GTR1054-13M Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter, Aluminium shell, Electroless Nickel plating, Shell Size 13(C), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£38.60
|
KTKK-2083 Raychem Angled adapter and shielded heat shrink boot
 | 90° Angled adapter and shielded heat shrink boot, Aluminium shell,Size 14, Cadmium olive drab plating, Suitable for JN1003, SJT, 8ST, HDJ connectors
£35.00
|
GTR1054-17NF Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter, Aluminium shell,Cadmium Olive Drab plating, Shell Size 17(E), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£31.08
|
388HS170NF1303 Glenair EMI/RFI knit mesh adapter with saddle clamp
 | MIL-DTL-38999 Series III, EMI/RFI knit mesh adapter with saddle clamp, Aluminium, Shell size 13(C), Cadmium olive drab plating, Non-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£43.52
|
GTR1054-23N Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter, Aluminium shell,Cadmium Olive Drab plating, Shell Size 23(H), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£35.21
|
388HS170NF21-07 Glenair EMI/RFI knit mesh adapter with saddle clamp
 | MIL-DTL-38999 Series III, EMI/RFI knit mesh adapter with saddle clamp, Aluminium, Shell size 21(G), Cadmium olive drab plating, Non-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£49.20
|
G8802-09N Glenair MIL-DTL-38999 Series III Angled 90° saddle clamp
 | MIL-DTL-38999 Series III Angled 90° saddle clamp, Aluminium shell, Cadmium olive drab plating, Shell Size 9(A), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£23.02
|
GTR64-10N Glenair Straight Qwik-ty adapter
 | Straight Qwik-ty adapter, Aluminium shell,Cadmim olived rab plating,Shell size 10, Connector Designator F: Suitable for MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309
£3.50
|
96H1-19-1-C Saddle clamp
 | Saddle clamp, Straight, Aluminium, Electroless Nickle plating, Shell Size 19 (F), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£0.00
|
650FS002B20 Glenair Dummy receptacle
 | MIL-DTL-38999 Series II , Dummy receptacle,Aluminium, Shell size 20,Camium olive drab plating.
£22.00
|
96H1-21-1-C Saddle clamp
 | Saddle clamp, Straight, Aluminium, Electroless Nickle plating, Shell Size 21 (G), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£0.00
|
DM53740-5000
 | D-Sub Size 8 solder braid contact, Short type, Gold over nickel, Male (Pin), Cables RG196, RG178
£4.35
As low as:
£2.25
|
96H1-23-1-C Saddle clamp
 | Saddle clamp, Straight, Aluminium, Electroless Nickle plating, Shell Size 23 (H), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£0.00
|
GTR117G-18N Glenair 90° Qwik-ty long body adapter with grounding lug
 | MIL-DTL-26482 Series II, 90° Qwik-ty long body adapter with grounding lug, Aluminium shell, Cadmium olive drab over electroless nickle, Shell size 18, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£26.00
|
96H1-25-1-C Saddle clamp
 | Saddle clamp, Straight, Aluminium, Electroless Nickle plating, Shell Size 23 (H), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£0.00
|
GTR112G-18N Glenair Straight Qwik-Ty clamp with grounding lug
 | Straight Qwik-Ty clamp with grounding lug, Aluminium shell, Shell size 18, Cadmium olive drab plating, Connector Designator A : Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£13.00
|
450HA001N17 Glenair MIL-DTL-38999 Series III Angled 90° Qwik-ty adapter
 | MIL-DTL-38999 Series III Angled 90° Qwik-ty adapter, Aluminium shell, Cadmium olive drab plating, Shell Size 17(E), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£19.52
|
M85049/63G16W Qwik-Ty 90 degree strain relief
 | Spin coupling Qwik-Ty 90 degree strain relief for MIL-DTL-38999 Series I & II, Self-locking with ground lug, Aluminium shell size 16 (Series I shell size 17), 500 Hour Salt spray, cadmium olive drab over electroless nickel plating (Non-Rohs), Suitable for MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309
£12.75
|
SW4-17T-3NC MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post
 | MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post and Nickle plated copper Braid, Aluminium shell, Electroless nickle plating, Shell Size 17 (E), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£57.36
|
M85049/63G12W Qwik-Ty 90 degree strain relief
 | Spin coupling Qwik-Ty 90 degree strain relief for MIL-DTL-38999 Series I & II, Self-locking with ground lug, Aluminium shell size 12 (Series I shell size 17), 500 Hour Salt spray, cadmium olive drab over electroless nickel plating (Non-Rohs), Suitable for MIL-DTL-38999 Series I & II, 40M38277, PAN 6433-1, PATT 614, PATT 616, NFC93422 Series HE308 & HE309
£12.00
|
M85049/1817W02 MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp
 | MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp, Aluminium shell, Cadmium olive drab finish, Shell Size 17(E),Min/ Max cable entry 3.2/ 6.4mm Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£52.63
|
G8967-20N Glenair Dummy receptacle
 | Dummy receptacle,Aluminium shell,cadmium olive drab plating,Shell size 20, Connector Designator L: Suitable for EN3372, JN1003, LN 29729, NFC93422, HE306, PAN 6433-2, PATT 615, VG 96912, SJT ,HDJ, 8ST
£35.00
|
M85049/1817W05 MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp
 | MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp, Aluminium shell, Cadmium olive drab finish, Shell Size 17(E),Min/ Max cable entry 12.7/15.9mm Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£41.48
|
380HD007N1705L Glenair Non-Enviromental EMI/RFI 90° backshell with saddle clamp
 | MIL-DTL-38999 Series III, Non-Enviromental EMI/RFI 90° backshell with saddle clamp, Aluminium shell, Cadmium olive drab plating,Shell size 17(E), Max cable entry size 15.9mm ,Connector Designator H: Suitable fo MIL-DTL-38999 Series III & IV , EN3645 , CECC 75201.002
£75.00
|
M85049/39S17W MIL-DTL-38999 Series III Angled 90° saddle clamp self locking
 | MIL-DTL-38999 Series III Angled 90° saddle clamp self locking, Aluminium shell, Cadmium olive drab plating, Shell Size 17(E), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£19.50
|
380HD007N1706L Glenair EMI/RFI 90° Split braid trap adapter with saddle clamp
 | MIL-DTL-38999 series III, EMI/RFI 90° Split braid trap adapter with saddle clamp. Max cable entry 19.1mm, Aluminium shell, Shell size 17(E), Cadmium olive drab plating, Connector Designator H: Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£86.00
|
GTR1054G-17M Glenair MIL-DTL-38999 Series III Straight Qwik-ty adapter with grounding tab
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter with grounding tab, Aluminium shell, Electroless nickel plating, Shell Size 17(E), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£28.95
|
380HB001N2306A Glenair Non-Enviromental EMI/RFI 45° adapter with saddle clamp
 | MIL-DTL-38999 Series III Non-Enviromental EMI/RFI 45° adapter with saddle clamp, Max cable entry 11.1mm, Aluminium shell, Cadmium olive drab plating, Shell size 23(H),Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£70.00
|
M85049/16S15N MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter self locking
 | MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter self locking, Aluminium shell, Electroless nickle plating , Shell size 15(D), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002 AS85049/15
£62.32
|
380HD007N2307L Glenair Angled 90° EMI/RFI Split backshell with saddle clamp
 | MIL-DTL-38999 Series III & IV, Angled 90° EMI/RFI Split backshell with saddle clamp, Aluminium ,Shell size 23(H), Cadmium olive drab over electroless nickle, Non-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£86.00
|
G8801-17M Glenair MIL-DTL-38999 Series III Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 17(E), Elctroless nickel, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£15.24
|
650HS010N23 Glenair Dummy stowage receptacle
 | MIL-DTL-38999 Series III Dummy stowage receptacle, Threaded coupling, Aluminium, Shell size 23(H), Cadmium olive drab over electroless nickle plating, Non-Rohs, Suitable for MIL-DTL-38999 Series III ,EN3645 , CECC 75201.002
£45.66
|
G8801-11NC Glenair MIL-DTL-38999 Series III Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 11(B),Zinc cobalt olive drab finish (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£17.92
|
650HS022NF25N Glenair Dummy stowage receptacle
 | MIL-DTL-38999 Series III ,Dummy stowage receptacle with Normal keyway ( Only Normal keyway connectors will fit this device), Threaded coupling, aluminim ,Shell size 25(J), Cadmium olive drab over electroless nickle plating(1000hr salt spray), Non-rohs, Suitable for MIL-DTL-38999 Series III , EN3645 , CECC 75201.002
£45.66
|
NCB4-R-15-02-012 MIL-DTL-38999 Series II 90° adapter shell only
 | MIMIL-DTL-38999 Series II 90° adapter shell only (Converts straight clamps to 90 degrees), Requires clamp to be purchased Separately, Shell Size 15 (D), Cadmium olive drab finish, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.0025
£57.98
|
G8073-4N Glenair EMI/RFI heat shrink boot braid trap adapter
 | Straight EMI/RFI heat shrink boot braid trap adapter, Aluminium shell, Shell size 14, Max cable entry 9.5mm,Cadmium olive drab plating, Connector Designator A : Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£40.00
|
388HS171NF15-04 Glenair MIL-DTL-38999 Series III Straight screen wrap adapter with heat shrink boot groove
 | MIL-DTL-38999 Series III Straight screen wrap adapter with heat shrink boot groove and Tinned copper Braid, Aluminium shell, Cadmium olive drab plating, Shell Size 15 (D), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£69.72
|
GS3416-18G-82N Glenair Back nut for heat shrink boot
 | MIL-DTL-26482 Series II, Back nut for heat shrink boot adapter, Aluminium shell, Shell size 18, Cadmium olive drab plating, Connector Designator A : Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£9.50
|
WNC4-15T-2TC Straight screen wrap adapter
 | MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post and Tinned copper Braid, Aluminium shell, Cadmium olive drab plating, Shell Size 15 (D), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£42.36
|
M85049/31-10W MIL-DTL-26482 Series II Back nut
 | MIL-DTL-26482 Series 2,Back nut, Aluminium shell, Cadmium olive drab over electroless nickel plating 500Hr salt spray (Non-Rohs), Shell size10, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£1.00
|
KMH3-11-1-C Polamco MIL-DTL-38999 Series II 90° adapter shell only
 | MIL-DTL-38999 Series II 90° adapter shell only (Converts straight clamps to 90 degrees), Requires clamp to be purchased Separately, Shell Size 11 (B), Electroless Nickel finish, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£58.42
|
M85049/51-1-8W MIL-DTL-26482 Series 2 Angled 90° Saddle clamp
 | MIL-DTL-26482 Series 2, Angled 90° Saddle clamp, Aluminium, Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Shell size 8, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£2.50
|
KMH3-25-1-C Polamco MIL-DTL-38999 Series II 90° adapter shell only
 | MIL-DTL-38999 Series II 90° adapter shell only (Converts straight clamps to 90 degrees), Requires clamp to be purchased Separately, Shell Size 25 (J), Electroless Nickel finish, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£80.22
|
GS3158-18-82N Glenair Heat shrink boot adapter
 | MIL-DTL-26482 Series II Heat shrink boot adapter, Alumninum shell, Cadmium olive drab, Shell Size 18, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2,MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£9.50
|
KMH3-19-1-C Polamco MIL-DTL-38999 Series II 90° adapter shell only
 | MIL-DTL-38999 Series II 90° adapter shell only (Converts straight clamps to 90 degrees), Requires clamp to be purchased Separately, Shell Size 19 (F), Electroless Nickel finish, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£58.42
|
131C10139X Pin Premating High Power 30-Amp Solder Bucket D-Sub
 | High Power contact machined, Male (Pin), Premating, Solder Bucket, 30 Amp, 10-12 AWG, 30µin Gold over nickel, Class 1 (500 Cycles)
£0.00
|
KMH3-15-1-C Polamco MIL-DTL-38999 Series II 90° adapter shell only
 | MIL-DTL-38999 Series II 90° adapter shell only (Converts straight clamps to 90 degrees), Requires clamp to be purchased Separately, Shell Size 15 (D), Electroless Nickel finish, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£58.42
|
131C10129X Pin Premating High Power 20-Amp Solder Bucket D-Sub
 | High Power contact machined, Male (Pin), Premating, Solder Bucket, 20 Amp, 12-14 AWG, 30µin Gold over nickel, Class 1 (500 Cycles)
£0.01
|
M85049/79-15W02 MIL-DTL-38999 Series III Angled 90° Enviromental EMI/RFI backshell with saddle clamp
 | MIL-DTL-38999 Series III Angled 90° Enviromental EMI/RFI backshell with saddle clamp, Aluminium shell, Shell Size 15(D), Cadmiuum Olive Drab plating, Cable range Min 3.2mm Max 6.4mm, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£84.38
|
131C16029X D-Sub High Power contact Angled Solder bucket or Crimp
 | D-Sub High Power contact machined, Male (Pin), Angled Solder bucket or Crimp, 20 Amp, 12-14 AWG, 30 Micro inch ( 0.8µ Au) Gold over nickel, Class 1 (500 Cycles)
£0.00
|
M85049/1815W05 MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp
 | MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp, Aluminium shell, Cadmium olive drab finish, Shell Size 15(D),Min/ Max cable entry 12.7/15.9mm Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£69.97
|
131C11149X Pin Premating High Power 40-Amp Crimp D-Sub
 | High Power contact machined, Male (Pin),Premating, Crimp, 40 Amp, 8-10 AWG, 30µin Gold over nickel, Class 1 (500 Cycles)
£0.01
|
M85049/39S15N MIL-DTL-38999 Series III Angled 90° saddle clamp self locking
 | MIL-DTL-38999 Series III Angled 90° saddle clamp self locking, Aluminium shell, Electroless Nickel finish, Shell Size 15(D), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£18.25
|
131C10149X Pin Premating High Power 40-Amp Solder Bucket D-Sub
 | High Power contact machined, Male (Pin),Premating, Solder Bucket, 40 Amp, 8-10 AWG, 30µin Gold over nickel, Class 1 (500 Cycles)
£0.01
|
M85049/1811N02 MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp
 | MIL-DTL-38999 Series III EMI/RFI Environmental backshell with saddle clamp, Aluminium shell, Electroless nickel finish, Shell Size 13(C),Min/ Max cable entry 3.2/ 6.4mm Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£69.97
|
131C11029X Pin High Power 20-Amp Crimp D-Sub
 | High Power contact machined, Male (Pin), Crimp, 20 Amp, 12-14 AWG, 30µin Gold over nickel, Class 1 (500 Cycles)
£3.80
|
G8802-15N MIL-DTL-38999 Series III Angled 90° saddle clamp
 | MIL-DTL-38999 Series III Angled 90° saddle clamp, Aluminium shell, Cadmium olive drab plating, Shell Size 15(D), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£19.85
|
131C10039X Pin High Power 30-Amp Solder Bucket D-Sub
 | High Power contact machined, Male (Pin), Solder bucket, 30 Amp, 10-12 AWG, 30µin Gold over nickel, Class 1 (500 Cycles)
£1.00
As low as:
£0.86
|
M85049/69-15AD Heat shrink boot adapter with drain hole
 | MIL-DTL-38999 Series III, Heat shrink boot adapter,spin coupling, Aluminium shell, Drain hole, Black anodized,Size 15(D), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£28.10
|
131C11039X Pin High Power 30-Amp Crimp D-Sub
 | High Power contact machined, Male (Pin), Crimp, 30 Amp, 10-12 AWG, 30µin Gold over nickel, Class 1 (500 Cycles)
£1.70
As low as:
£0.99
|
M85049/14S23N MIL-DTL-38999 Series III Back Nut Self locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 23(H), Electroless Nickel, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£21.34
|
132J21039X D-Sub Coax Crimp contact 50Ω Socket RG58,RG141
 | D-Sub Coax Crimp contact 50Ω , Socket (Female), Gold over nickel .051 μ“/1.3 μm Au inner .032 μ“/ 0.8 μm Au outer conductor, Suitable for cables RG58,RG141
£0.00
|
M85049/14S23W MIL-DTL-38999 Series III Back Nut Self Locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 23(H), Cadmium olive drab, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£21.34
|
D130344-1 D-Sub Coax Crimp contact 75Ω Plug RG179
| D-Sub Coax Crimp contact 75Ω , Socket (Female), Gold over Nickel ,Suitable for cables RG179
£3.20
|
M85049/14S19N MIL-DTL-38999 Series III Back Nut Self locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 19(F), Electroless Nickel, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£21.34
|
05-2042-10 MIL-DTL-26482 Series I Potting cup
 | MIL-DTL-26482 Series I Potting cup, Shell size 10, Clear Cup with aluminium ring, Cadmium olive drab, BS9522F0017, Pattern105, MIL-C-26482
£6.50
|
M85049/14S19W MIL-DTL-38999 Series III Back Nut Self Locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 19(F), Cadmium olive drab, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£21.34
|
DTL-38999/32F-19-WR5-03 D38999 Series III Plug protection cap
| D38999 Series III Plug protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 19(F)
£19.11
As low as:
£13.16
|
M85049/14S17W MIL-DTL-38999 Series III Back Nut Self Locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 17(E), Cadmium olive drab, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£15.78
|
DTL-38999/32F-11-WR5-03 D38999 Series III Plug protection cap
| D38999 Series III Plug protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 11(B)
£16.93
As low as:
£11.69
|
M85049/14S9W MIL-DTL-38999 Series III Back Nut Self Locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 9(A), Cadmium olive drab, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£24.14
|
DTL-38999/33F-19-WR5-19 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with large ring 35.0mm, Shell size 19(F)
£19.08
As low as:
£13.16
|
M85049/14S13W MIL-DTL-38999 Series III Back Nut Self Locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 13(C), Cadmium olive drab, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£12.54
|
DTL-38999/32F-21-WR5-03 D38999 Series III Plug protection cap
| D38999 Series III Plug protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 21(G)
£19.63
As low as:
£13.55
|
M85049/14S13N MIL-DTL-38999 Series III Back Nut Self locking
 | MIL-DTL-38999 Series III Back Nut Self locking, Aluminium shell, Shell Size 13(C), Electroless Nickel, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£12.22
|
DTL-38999/32F-25-WR5-03 D38999 Series III Plug protection cap
| D38999 Series III Plug protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 25(J)
£20.84
As low as:
£14.38
|
GS3158-20-82N GLENAIR Heat shrink boot adapter
 | Heat shrink boot adapter, Alumninum shell, Cadmium olive drab, Size 20, Suitable for MIL-DTL-5015 Series 3 (3400) ,MIL-DTL-26482 Series 2, MIL-DTL-81703 Series 3,MIL-DTL-83723 Series I & III,40M39569, DEF 5326-3,EN 2997, EN 3646,ESC 10, ESC 11, LN 29504,NFC93422 Series HE302,PAN 6432-1, PAN 6432-2,PATTERN 602
£11.50
|
DTL-38999/32F-23-WR5-03 D38999 Series III Plug protection cap
| D38999 Series III Plug protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 23(H)
£20.23
As low as:
£13.96
|
91H1-21-12-1-B-HE300 Screened Emi/Rfi constant force spring adapter
 | MIL-DTL-38999 Series III, Straight EMI/RFI spring ring adapter with groove for heat shrink boot (supplied with spring ring), Aluminum shell, Cadmium olive drab plating , Shell Size 21 (G), Max cable entry 19.05mm, Non-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£38.68
|
DTL-38999/32F-13-WR5-03 D38999 Series III Plug protection cap
| D38999 Series III Plug protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 13(C)
£17.46
As low as:
£12.04
|
76H1-11-1B MIL-DTL-38999 Series III Heat Shrink Boot adapter
 | MIL-DTL-38999 Series III, Heat Shrink Boot adapter, Aluminum shell, Cadmium olive drab plating , Shell Size 11 (B), Non-Rohs, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£8.88
|
DTL-38999/32F-17-WR5-03 D38999 Series III Plug protection cap
| D38999 Series III Plug protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 17(E)
£18.52
As low as:
£12.78
|
97H1-19-1-B Heat shrink boot adapter
 | MIL-DTL-38999 Series III, Heat shrink boot adapter, Spin coupling, Aluminium shell, Shell Size 19(F), Cadmium Olive drab finish, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£16.05
|
DTL-38999/32F-15-WR5-03 D38999 Series III Plug protection cap
| D38999 Series III Plug protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 15(D)
£17.98
As low as:
£12.40
|
GTR1056G-13N Glenair MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter with grounding lug
 | MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter with grounding lug, Aluminium shell, Cadmium olive drab plating , Shell size 13(C), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£49.12
|
DTL-38999/33F-23-WR5-03 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 23(H)
£20.23
As low as:
£13.96
|
620HS042XO13 Glenair MIL-DTL-38999 Series III Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking,Composite shell ,Shell size 13(C), No plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£53.64
|
DTL-38999/32F-9-WR5-03 D38999 Series III Plug protection cap
| D38999 Series III Plug protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 9(A)
£16.45
As low as:
£11.36
|
BACC10MA13
 | MIL-DTL-38999 Series III Swing arm saddle clamp, Composite, Shell Size 13(C)
£68.92
|
DTL-38999/33F-25-WR5-03 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 25(J)
£20.84
As low as:
£14.38
|
WNC4-13T-2TC-09 Straight screen wrap adapter
 | MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post and Tinned copper Braid, Aluminium shell, Cadmium olive drab plating, Shell Size 13 (C) step down cable entry shell size 9, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£42.36
|
DTL-38999/33F-11-WR5-11 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with large ring 18mm, Shell size 9(A)
£16.93
As low as:
£11.69
|
GS85049/69-13NF Glenair MIL-DTL-38999 Series III Heat shrink boot adapter
 | MIL-DTL-38999 Series III Heat shrink boot adapter, spin coupling,aluminium shell, Cadmium olive drab over electroless nickle plating(1000Hr Salt spray) (Non-Rohs), Size 13(C), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£18.80
|
DTL-38999/33F-9-WR5-09 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with large ring 18mm, Shell size 9(A)
£16.45
As low as:
£11.36
|
M85049/39-9W MIL-DTL-38999 Series III Angled 90° saddle clamp
 | MIL-DTL-38999 Series III Angled 90° saddle clamp, Aluminium shell, Cadmium olive drab plating, Shell Size 9(A), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£7.25
|
DTL-38999/33F-25-WR5-25 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with large ring 44.6mm, Shell size 25(J)
£20.84
As low as:
£14.38
|
G8802-13M Glenair MIL-DTL-38999 Series III Angled 90° saddle clamp
 | MIL-DTL-38999 Series III Angled 90° saddle clamp, Aluminium shell, Electroless nickel plating, Shell Size 13(C), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£23.02
|
DTL-38999/33F-21-WR5-21 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with large ring 38.3mm, Shell size 21(G)
£19.63
As low as:
£13.55
|
WNC4-13T-2TC Straight screen wrap adapter
 | MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post and Tinned copper Braid, Aluminium shell, Cadmium olive drab plating, Shell Size 13 (C), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£42.36
|
DTL-38999/33F-15-WR5-15 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with large ring 28.8mm, Shell size 15(D)
£17.98
As low as:
£12.40
|
M85049/16S13N MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter self locking
 | MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter self locking, Aluminium shell, Electroless nickle plating , Shell size 13(C), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£25.18
|
DTL-38999/33F-17-WR5-17 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with large ring 32.0mm, Shell size 17(E)
£18.52
As low as:
£12.78
|
SW4-13S-3TC MIL-DTL-38999 Series III EMI/RFI knit mesh Screen trap adapter with heat shrink boot groove
 | MIL-DTL-38999 Series III, EMI/RFI knit mesh Screen trap adapter with heat shrink boot groove, Aluminium shell, Shell size 13(C), Electroless nickle plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£49.78
|
DTL-38999/33F-17-WR5-03 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 17(C)
£18.52
As low as:
£12.78
|
450HS001NF13 GLENAIR MIL-DTL-38999 Series III Straight Qwik-ty adapteR
 | MIL-DTL-38999 Series III Straight Qwik-ty adapter, Aluminium shell,Cadmium Olive Drab plating, Shell Size 13(C), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£47.15
|
DTL-38999/33F-23-WR5-23 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with large ring 41.7mm, Shell size 23(H)
£20.23
As low as:
£13.96
|
M81969/14-09 Contact Insertion / Removal Tool
 | Installing/Removal Tool - Plastic composition - Color Code: Brown/White Installs and Removes Size 22 Pin/Soc Contacts For Connector Series: MIL-C-55302/169 /171
£4.52
|
DTL-38999/33F-21-WR5-03 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 21(G)
£19.63
As low as:
£13.55
|
M81969/14-06 Contact Insertion / Removal Tool
 | Installing/Removal Tool - Plastic composition - Color Code: Red Installs and Removes Size 8 Pin/Soc Contacts For Connector Series: MIL-C-26482, MIL-C-81703, MIL-C-83723, MIL-T-81714 and MIL-C-5015
£3.50
|
DTL-38999/33F-19-WR5-03 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 19(F)
£19.08
As low as:
£13.16
|
91H1-11-05-1-ZB-SB Screened Emi/Rfi steel band adapter
 | Straight, Screened Emi/RFI adapter including steel band, Including lip for heat shrink boot, Aluminium Shell,Shell size 11(B),Max cable entry 7.92mm, Zinc cobalt olive drab plating, MIL-DTL-38999 Series 3 and 4
£47.36
|
DTL-38999/33F-15-WR5-03 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 15(D)
£17.98
As low as:
£12.40
|
M85049/38-11A Straight saddle clamp
 | MIL-DTL-38999 Series III, Straight saddle clamp, Aluminium,Shell size 11(B), Black anodised, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£11.50
|
DTL-38999/33F-13-WR5-03 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 13©
£17.46
As low as:
£12.04
|
M85049/16S11N MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter self locking
 | MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter self locking, Aluminium shell, Electroless nickle plating , Shell size 11(B), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£24.36
|
DTL-38999/33F-11-WR5-03 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 11(B)
£16.93
As low as:
£11.69
|
M85049/38S11W Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium,Shell size 11(B), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£11.50
|
DTL-38999/33F-9-WR5-03 D38999 Series III Receptacle protection cap
| D38999 Series III Receptacle protection cap, Threaded, Aluminium shell, Electroless nickel finish, Attachment nylon covered (Clear) stainless steel rope 5 Inches (127mm) with 4.2mm eyelet, Shell size 9(A)
£16.45
As low as:
£11.36
|
M85049/38S17N Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium,Shell size 17(E), Electroless nickle plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£16.62
|
M81969/1-03 Contact Insertion / Removal Tool
 | Installing/Removal Tool - Plastic body metal tip composition - Color Code: Blue/White Installs and Removes Size 16 Pin/Soc Contacts For Connector Series: MIL-C-24308 and MIL-C-81659
£5.64
|
M85049/38S19N Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium,Shell size 19(F), Electroless nickle plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£16.62
|
M81969/14-08 Contact Insertion / Removal Tool
 | Installing/Removal Tool - Plastic composition - Color Code: Yellow Installs and Removes Size 0 Pin/Soc Contacts For Connector Series: MIL-C-26482, MIL-C-81703, MIL-C-83723, MIL-C-38999, MIL-T-81714 and MIL-C-5015
£4.52
|
M85049/38S21W Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium,Shell size 21(G), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£16.62
|
131C11139X Pin Premating High Power 30-Amp Crimp D-Sub
 | High Power contact machined, Male (Pin), Premating, Crimp, 30 Amp, 10-12 AWG, 30µin Gold over nickel, Class 1 (500 Cycles)
£0.00
|
M85049/38S23W Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium,Shell size 23(H), Cadmium olive drab over electroless nickle plating 500Hr salt spray (Non-Rohs), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£22.15
|
M85049/95-10A Nut Plate Size 10
 | Nut plate ¾ Perimeter, Aluminium alloy, Class A, Size 10, Nut thread 4-40unc, Nut-Self-locking clinch typeCorrosion resistant alloy steel. AS85049/95.
£6.66
As low as:
£3.15
|
M85049/38S9N Straight saddle clamp self locking
 | MIL-DTL-38999 Series III, Straight saddle clamp self locking, Aluminium, Shell size 9(A), Electroless nickle plating, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£15.50
|
DRK16B Metal Removal tool for Size 16 contacts, Blue, M81969/19-01 (REV B)
 | Metal Removal tool for Size 16 contacts, Blue, M81969/19-01 (REV B), Connectors MIL-DTL-26500, MIL-DTL-26482 Series 1.
£36.00
|
WNC4-09T-2TC Straight screen wrap adapter
 | MIL-DTL-38999 Series III Straight screen wrap adapter with cable tie post and Tinned copper Braid, Aluminium shell, Cadmium olive drab plating, Shell Size 9 (A), MIL-DTL-38999 Series III.
£39.72
|
5091-022-204H Aero Crimp Contact Socket (Female) Size 20
 | Crimp Contact, Socket (Female) Size 20, For the following connectors with inserts 8-2, 8-3, 8-4 Only Connector with prefix AE770, AE771,AE772, AE774, AE775, AE776, AC3470, AC3471, AC3472, AC3474, AC3475, Requires Crimp tool body M22520/1-01 & Positioner M22520/1-02 (RED) or M22520/2-01 & Positioner M22520/2-02, Plastic insert removal tool M81969/39-01 or Metal insert toll M81969/8-205B & Removal tool M81969/8-206B
£5.44
|
G8408-11N MIL-DTL-38999 Series III Back Nut
 | MIL-DTL-38999 Series III Back Nut, Aluminium shell, Shell Size 11(B), Cadmium olive drab over Nickel finish, Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£5.50
|
5291-022-204H Aero Crimp Contact Pin (Male) Size 20
 | Crimp Contact, Pin (Male) Size 20, For the following connectors with inserts 8-2, 8-3, 8-4 Only. Connector with prefix AE770, AE771,AE772, AE774, AE775, AE776, AC3470, AC3471, AC3472, AC3474, AC3475, Requires Crimp tool body M22520/1-01 & Positioner M22520/1-02 (RED) or M22520/2-01 & Positioner M22520/2-02, Plastic insert removal tool M81969/39-01 or Metal insert toll M81969/8-205B & Removal tool M81969/8-206B
£3.40
|
GTR1056G-25N Glenair MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter with grounding lug
 | MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter with grounding lug, Aluminium shell, Cadmium olive drab plating , Shell size 25(J), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£49.12
|
DRP24 DMC Circular Ring Pliers
 | The DRP-XX circular ring pliers are specifically designed to grip circular connector and backshell components which would be deformed by other gripping methods. The non marring rubber jaw lining material is available in strip form and may be used to replace worn jaw inserts. It is held in place by interlocking fingers which are molded into the material. Suitable for shell size 24/25, Grip Range 37.846 to 38.608mm, Replacement Pads are available (P/N DRP-078R).
£78.94
|
GTR1056G-23N Glenair MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter with grounding lug
 | MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter with grounding lug, Aluminium shell, Cadmium olive drab plating , Shell size 23(H), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£49.12
|
DRP22 DMC Circular Ring Pliers
 | The DRP-XX circular ring pliers are specifically designed to grip circular connector and backshell components which would be deformed by other gripping methods. The non marring rubber jaw lining material is available in strip form and may be used to replace worn jaw inserts. It is held in place by interlocking fingers which are molded into the material. Suitable for shell size 22/23, Grip Range 35.306 to 36.068mm, Replacement Pads are available (P/N DRP-078R).
£78.94
|
GTR1056G-21M Glenair MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter with grounding lug
 | MIL-DTL-38999 Series III, Angled 90° Qwik-ty adapter with grounding lug, Aluminium shell, Electroless nickle plating , Shell size 21(G), Suitable for MIL-DTL-38999 Series III & IV ,EN3645 , CECC 75201.002
£49.12
|
